>r1483> setpvc 8/35 llc
>r1483>
Command format: setpvc [<vpi>/]<vci> [llc/vcmux]
parameter: |
|
|
VPI/VCI: | Sets PVC | with the VPI/VCI number. |
LLC/VCMUX: | Shows the encapsulation type according to | |
| RFC1483. |
|
8.2.10.4Setqos command
The setqos command sets the priority for the active PVC.
>r1483> setqos 8/35 ubr
>r1483>
Command format: setqos [<vpi>/]<vci> <ubrcbrvbr(nrt)>
Parameter: |
|
VPI/VCI: | Sets PVC with the VPI/VCI number. |
UBR: | Sets the UBR priority. |
CBR: | Sets the CBR priority. |
VBR: | Sets the VBR priority. |
VBRNRT: | Sets the |
Note! The setqos command changes the PVC parameters, first configured by the quick command (see 8.2.9) or setpvc command (see 8.2.10.3). If the mentioned PVC is not found, the system displays an error message.
8.2.10.5Setspan command
The setspan command enables and disables the spanning tree mode for all PVCs.
>r1483> setspan disable
>r1483>
Command format: setspan <Enable><Disable>
Parameter: |
|
Enable: | To enable the spanning tree mode for |
| all PVCs. |
UBR: | To disable the spanning tree mode for |
| all PVCs. |
Version: 1.0 | Page. 56 of 95 |