
DCP Operation
To implement Change, select the appropriate function (Active, Delete, or Skip). (For Skip, you will
need to press the key until Skip appears.)
Poll List:yyyyyy
Ent "xxx
F1 F2 F3
The function field (yyyyyy) displays the function selected (Active, Delete, or Skip).
The address field (xxx) displays the network management address of the modem to be changed. The valid address field range is from 001 to 256.
To increment digits within the address field (xxx), use the and
keys to position the cursor ( _ ) under the digit to be incremented. Press the F2 (") key to increment the digit.
Press Enter (Ent) to implement the function (yyyyyy) you selected (Active, Delete, or Skip). The message Command Complete appears on the second line of the LCD to indicate that the poll list change occurred. If the message Poll List Check appears, you attempted to delete an address that is not on the poll list, or you attempted to add an address that is already on the poll list. If the message Poll Lst too Big appears, you exceeded the maximum number of downstream devices. To
return to the selected function (Active, Delete, or Skip), press the key. The address automatically increments upon returning to this function.
To exit this function (Active, Delete, or Skip) and remain in the PList Change branch, press the
key. To exit and return to the key.
Add
The Add function does not appear in Remote mode or on control modems.
Add allows you to add the tributary modem to a control modem's poll list. This function should be initiated from only one tributary modem at a time.
To access Add from the Plist branch, make the following selections:
Poll | List: |
|
Change | Add | |
F1 | F2 | F3 |
Press the
key until Add appears. Select Add.
Poll List:Add
Command Complete
F1 F2 F3
November 1996 |