Paradyne 392xPLUS operation manual Point-to-Point with Automatic Dial Backup, Cables

COMSPHERE 392xPlus Modems

Cables

Cable 1 Use a standard, customer-supplied, EIA-232-D/V.24 cable with a DB-25-P (plug) connector at one end to attach to the modem. Attach this to the connector labeled DTE1, 2, 3, or 4.

Cable 2 Use part number 125-0053-1431 (an 8-position, 8-wire modular cord that is supplied with the modem). Attach this to the connector labeled LEASED.

Cable 3 Use part number 818-2759-0111 or an equivalent customer-supplied, EIA-232-D/V.24 crossover cable with DB-25-P (plug) connectors on both ends to attach to the modems. (See Appendix C for pin assignments.)

Point-to-Point with Automatic Dial Backup

Figure G-4 shows a sample configuration for point-to-point applications with automatic dial backup.

DTE	9600		Dial			9600	DTE
(Sync)		Cable 4		Cable 4			(Sync)
DTE	9600	28800(V34)		28800(V34)		9600	DTE
(Sync)							(Sync)
		TX		TX
DTE	4800	3920Plus A	Leased	3920Plus B		4800	DTE
(Sync)							(Sync)
DTE	4800					4800	DTE
		Cable 2	Cable 2				(Sync)
(Sync)					Cable 1
		Cable 1

Figure G-4. Sample Configuration Ð Point-to-Point with Automatic Dial Backup

G-8 November 1996 3920-A2-GN31-30