Paradyne 392xPLUS operation manual Configure Branch, Poll List Branch

COMSPHERE 392xPlus Modems

Select Nxt to scroll through the entries in the Service Log.

To exit this function and remain in the Status branch, press the key. To exit and return to the

Top-Level menu, press the key.

Configure Branch

The Configure branch of the LCD allows you to change and save the modem's configuration options. For configuration options and DCP configuration procedures, refer to Chapter 4, DCP Configuration.

Poll List Branch

The Poll List function is not available in:

•Multipoint tributary modems.

•Modems with the Diag Connection configuration option disabled.

•Modems using modulations that do not support the secondary channel.

•Point-to-point control modems.*

The Poll List (Plist) branch of the Top-Level menu allows you to identify downstream modems in order to support health and status polling and download broadcasting. The maximum number of devices is 32 on the secondary channel and 64 on the diagnostic channel.

ªStatusº

Status

Configure

Control

Test

SubHS

Call_Setup

Tlk/Data

Security

Remote

PList

(Tributary

only)

Display Clear Change Add Acquire

Active

Delete

Skip

To access PList from the Top-Level menu, make the following selections:

* Point-to-point control modems only poll address 01, and point-to-point tributary modems are always set to address 01.

3-30 November 1996 3920-A2-GN31-30