Paradyne 392xPLUS operation manual Talk/Data Branch, Number Status Nxt 01Allowed

DCP Operation

Number Status

Nxt 01:Allowed

F1 F2 F3

Select Nxt to display other directory locations.

The status of a directory location can be:

No Number	The directory location is empty.
Allowed	The number in this directory location may be dialed at this time.
Delayed	The number in this directory location may be dialed later.
Forbidden	The number in this directory location may not be dialed.

Delayed and Forbidden only appear in countries with specific dialing requirements.

When a number is delayed, press the

key to display the value of the delay in minutes.

The delayed and forbidden conditions can be cleared by power cycling the modem. This is actually the only way to re-enable a forbidden number. Deleting a number from a directory location and reentering it into another directory location will not change the delayed or forbidden condition of this number.

Talk/Data Branch

The Talk/Data function is not available in TMp Control mode.

The Talk/Data branch of the Top-Level menu allows you to switch the modem between Talk mode and Data mode when manually dialing using either the DCP or an externally attached telephone.

To add an external telephone to your modem, use an external ªYº cable to connect the phone line to both the modem and the telephone (refer to Appendix C). This cable is not supplied with your modem.

On initial power-up, the modem is in Data mode. When in Data mode, the modem is connected and data can be transmitted or received. When in Talk mode, the modem is disconnected and you are free to use the external telephone. This function is not available for Model 3921Plus modems.

ªStatusº

Status

Configure

PList

Control

Test

SubHS

Call_Setup

Security

Remote

Tlk/Data

3920-A2-GN31-30 November 1996 3-73