COMSPHERE 392xPlus Modems

Change Directory

Change Directory allows you to enter or modify telephone numbers. The modem has nonvolatile memory locations that allow you to store up to 24 telephone numbers. Each directory location can accept up to 40 characters; this includes the telephone number and dial command modifiers. Any telephone number dialed using the DCP Dial command must appear in a directory location.

NOTE

If the modem is operating on leased lines and has a dial line attached for dial backup purposes, it is required that directory location 1 contain the telephone number used for dial backup.

To access Change Directory from the Call Setup branch, make the following selections:

Call

Setup:

<

Change_Directory

F1

F2

F3

Press the key until Change_Directory appears. Press any function key to select

Change_Directory.

01:551234z

 

Nxt

"

#

F1 F2 F3

The phone number listed in directory location 1 appears. Select Nxt to display other directory locations.

3-70

November 1996

3920-A2-GN31-30

Page 107
Image 107
Paradyne 392xPLUS operation manual Change Directory, Call Setup ChangeDirectory, 01 551234 z Nxt