Paradyne 392xPLUS operation manual 02z Nxt, 019W5556789z Nxt

DCP Operation

Entering Telephone Numbers and Dial Command Modifiers into Directory Locations

The following example uses an empty directory location for describing how to enter a telephone number. If you want to change an existing telephone number in any of the 24 directory locations, follow the same procedures.

To add a telephone number to a directory location, make the following selections:

02:z

Nxt ￿ ￿

F1 F2 F3

Select Nxt until a blank directory appears on the LCD. (The cursor ( _ ) always appears in the first character position.)

Select F2 ( ￿ ) or F3 ( ￿ ) until the desired character is selected. This can be an alpha or numeric character.

02:z

Nxt ￿ ￿

F1 F2 F3

Press the

key to move the cursor to the next character position.

Continue this key sequence until the dial command modifiers and telephone number are entered. (Refer to Table 3-9 for a list of valid dial command modifiers.)

01:9W5556789z

Nxt ￿ ￿

F1 F2 F3

To save the number just entered, scroll to the next directory location by selecting Nxt. The number is now stored in nonvolatile memory.

Table 3-9 describes what can be entered in directory locations.

3920-A2-GN31-30 November 1996 3-71