DCP Operation
If unsuccessful, the modem remains in the Download Transfer mode. The LCD's top line displays RemClone Failed and the bottom line displays one of the following messages:
Incompat Modulat | The modems are connected, but are using a modulation scheme other |
| than V.34 family, V.33, V.32 family, V.29, or TMp. |
No Response | The remote modem is not a 3900 Series modem or the connection |
| between the two modems is poor. |
Access Disabled | The remote modem's Access from Remote configuration is disabled. |
Password Invalid | The local and remote modems' passwords do not match. Correct the |
| problem and attempt another download from the local modem. If this |
| fails, contact your service representative. |
No Circuit | There is no connection between the local and remote modem. |
After successful establishment of a Remote Cloning Download session, the following screens appear.
RemClone Status
Initializing
F1 F2 F3
RemClone Status
Bank1:xxxx/yyyy
F1 F2 F3
As the firmware transfers, the local and remote LCD's bottom line displays the status of the download process, plus the number of records sent versus the total number of records for that data bank number.
For Single download applications, if the download is successful, the local modem displays Remote Clone OK and the remote modem displays Frmware Upgrade. If the download took place over the dial network, the modems disconnect when the download is complete.
If the Single download is unsuccessful, RemClone Failed appears on the LCD's top line. Attempt another download from the local modem. If this fails, contact your service representative.
November 1996 |
