Paradyne 392xPLUS operation manual Identity

DCP Operation

VF Counter Clear

Command Complete

F1 F2 F3

The message Command Complete appears on the LCD's bottom line indicating the VF Counters are cleared.

To exit VF and remain in the Status Branch, press the key. To exit and return to the Top-Level

menu, press the key.

Identity

Identity displays the modem's serial number, model number, firmware revision level, hardware revision number and firmware part number. Retrieval of this information is useful if you are purchasing additional or replacement modems and/or making firmware upgrades.

To access Identity from the Status branch, make the following selection:

Status:
VF		Identity
F1	F2	F3

Press the

key until Identity appears. Select Identity.

Status:Identity >

Ser#=00000000

F1 F2 F3

The modem's serial number appears on the LCD's bottom line. Press the key to scroll and

view the model number, firmware revision level, hardware part number, and firmware part number.

Ser #	Serial number is an 8-digit number that identifies the modem.
Mod #	Model number is an alphanumeric number that identifies the modem as
	either a Model 3920Plus or Model 3921Plus modem.
FRev	Firmware revision level is an alphanumeric number that identifies the level
	of firmware loaded in the modem.
HPt #	Hardware part number is an 11-digit number that identifies the circuit card in
	the modem.
FPt #	Firmware part number is an 11-digit number that identifies to service
	personnel the firmware release number.
Country	Country code is a 7-text character that identifies the current country code.

To exit the Identity function and remain in the Status branch, press the key. To exit and return

to the Top-Level menu, press the key.

3920-A2-GN31-30 November 1996 3-23