COMSPHERE 392xPlus Modems
DTE
DTE displays the state and/or activity of the following interface leads: LSD, DTR, DSR, TST, TXD, RXD, RTS, and CTS. The interface leads status is updated every 5 seconds.
To access DTE from the Status branch, make the following selections:
Status:
Identity DTE
F1 F2 F3
Press the
key until DTE appears. Select DTE.
Select DTE Port >
Port1Port2
F1 F2 F3
Select the appropriate port by pressing the corresponding function key. Press the 
key to scroll other ports into view. Only Ports 1 and 2 appear when the the DTE Bridge configuration option is enabled.
This screen does not appear in Singleport mode.
LSD DTR DSR Tst>
_ | * | _ |
F1 | F2 | F3 |
The activity and state of the modem's DTE signal appear on the LCD's bottom line. Press the key to scroll other signals into view.
The LCD's bottom line displays a pair of symbols for each interface lead. The first symbol indicates the signal's activity since entering the DTE status display. An * (asterisk) indicates at least one transition while a blank space indicates no transitions.
The second symbol indicates the state of the interface lead at the sampling time. A 
(solid block) indicates a Space or ON condition while an underscore ( _ ) indicates a Mark or OFF condition.
To exit this function and remain in the Status branch, press the 
key. To exit and return to the
key.
November 1996 |
