Paradyne 392xPLUS 3910 a, TX Clock Source, LeasedLine Rate, Autorate Leased Line Set to Disable

Sample Configurations

3910 A	Use Sync Leased (Answer) default configuration options with the following
	exceptions:
	TX Clock Source	Set to External.
	LeasedLine Rate	Set to 4800(V32b).
	Autorate (Leased Line) Set to Disable.
3910 B	Use Sync Leased (Originate) default configuration options with the following
	exceptions:
	TX Clock Source	Set to RXC_Loop.
	LeasedLine Rate	Set to 4800(V32b).

Autorate (Leased Line) Set to Disable.

Sample Port Rate Table

Port	Port 1	Port 2	Port 3	Port 4
Rate
28.8K	9600	9600	4800	4800
24.0K	9600	Disable	4800	4800
19.2K	9600	Disable	4800	4800
16.8K	9600	Disable	Disable	4800
14.4K	9600	Disable	Disable	4800
12.0K	Disable	Disable	Disable	4800
9.6K	Disable	Disable	Disable	4800
7.2K	Disable	Disable	Disable	4800
4.8K	Disable	Disable	Disable	4800

2.4K

Disable Disable Disable Disable

Cables

Cable 1 Use a standard, customer-supplied, EIA-232-D/V.24 cable with a DB-25-P (plug) connector at one end to attach to the modem. Attach this to the connector labeled DTE1, 2, 3, or 4.

Cable 2 Use part number 125-0053-1431 (an 8-position, 8-wire modular cord that is supplied with the modem). Attach this to the connector labeled LEASED.

Cable 3 Use part number 818-2759-0111 or an equivalent customer-supplied, EIA-232-D/V.24 crossover cable with DB-25-P (plug) connectors on both ends to attach to the modems. (See Appendix C for pin assignments.)

3920-A2-GN31-30 November 1996 G-5