COMSPHERE 392xPlus Modems
From the Choose DLL Type screen, press the F1 key to select SC_Clone to request the transfer of an exact copy of the tributary modem's firmware to the VF connected control modem.
Proceed to the section titled Implementing a Clone Remote Operation, which follows the descriptions of multipoint cloning operations.
Cloning DC Broadcast Remote
Before using Clone Remote in DC Broadcast configurations, make sure the tributary modem's active poll list contains all the network management addresses for the control modems that receive the download (refer to the Poll List Branch section in this chapter), and ensure that the control modems are responding properly to polls (refer to the
Choose DLL Type >
DC_Broadcast
F1 F2 F3
From the Choose DLL Type screen, press the 
key until DC_Broadcast appears. Press F1 or F2 to transfer an exact copy of the tributary modem's firmware to the
Proceed to the section titled Implementing a Clone Remote Operation, which follows the descriptions of multipoint cloning operations.
Viewing DC Broadcast Clone Results
Choose DLL Type >
DC_CloneResults
F1 F2 F3
From the Choose DLL Type screen, press the 
key until DC_CloneResults appears to view the results of the last DC_Broadcast clone operation. If the message Trib List Empty appears, this indicates that a multiple download was never initiated.
DC Clone Results
Nxt xxx Pass
F1 F2 F3
The address field (xxx) displays the network management address of one of the remote modems. Pressing the F1 key allows you to select various remote modems to determine the download result for those modems (Pass or Fail).
November 1996 |
