Modem Installation

If the Model 3921Plus modem is to communicate with an installed SDCP, install the modem as described above and perform the following steps:

1. Press the Select key on the SDCP. The Carr:Slot screen appears with the cursor on the slot selection position (01 on the first LCD line in following screen example).

Carr:Slot: 1:01A

↑ ↓ 1:01A

F1 F2 F3

2.Press the F1 ( ￿ ) or F2 ( ￿ ) key until the slot number you want appears.

3.If you have more than one carrier, press the key to move the cursor to the carrier selection position (1: on the first LCD line in the following screen example).

Carr:Slot: 1:01A

↑ ↓ 1:01A

F1 F2 F3

4.Press the F1 ( ￿ ) or F2 ( ￿ ) key until the carrier number you want appears.

The carrier number selection has a range of 1 to 8 since a single SDCP can control a configuration of up to eight carriers. (This is only possible if the SDU is installed.)

5.Press the modem.

Select

key to place the SDCP in direct communication with the selected

The LCD displays the Top-Level menu for the selected modem. In addition, the Front Panel LED on the modem's faceplate and the OK LED on the SDCP light.

3920-A2-GN31-30

November 1996

2-9

Page 34
Image 34
Paradyne 392xPLUS operation manual CarrSlot 101A ↑ ↓ 101A