Paradyne 392xPLUS operation manual Multiport Mode

DCP Configuration

Multiport Mode ✫

DTE	DTE	Line	Dial	Leased_Line	V.42/	Test	Misc	Security
Interface	Dialer	Dialer	Line		MNP/
					Buffer
		AutoAnswerRing#	Dial Modulation	LeaseModulation		Test Timeout	StrapsWhenDisc
		Dialer Type	Dial Line Rate	LeasedLine Rate		V54 Address	Speaker Control
		DialTone Detect	Autorate	Leased Mode		V54 Device Type	Speaker Volume
		Blind Dial Paus	V32bis Override	Autorate			Access frm Remt
		BusyTone Detect	Dial Tx Level	V32bis Override			RemAccssPasswrd
		"," Pause Time	Train Time	Leased Tx Level			Dir#1_Callback
		NoAnswer Timout	Asymmetric Rate	Asymmetric Rate			NMS_Call_Msgs
		Fast Disconnect		Auto Dial Back			NetworkPosition
		Line Crnt Disc		AutoDialStandby			NetMngmtAddress
		Long Space Disc		SpecialStandby			Diag Connection
		No Carrier Disc		DialStandbyTime			Link Delay(sec)
		No Data Disc		CarrierOn Level
		Auto Make Busy		Lease Lookback
				Dual_Leased_Ln
				BackupLine Check

MUX	Copy		Port 1	Port 2* Port 3* Port 4*
MUX Mode	From Port X
–TDM/MSD
–DTE Bridge	To Port X or All	Rate*			Async		EIA
Tx Clock Source
Bakup_TXClk_Src		Modem MSD		Async/Sync		DTR Action
CT111_Rate Cntl
		Rate at 33.6 K		Async DTE Rate		DSR Control
MSD Port Control
		Rate at 28.8 K		Asyn #Data Bits		RTS Action
		Rate at 24.0 K		Asyn #Stop Bits		RTS Antistream
		Rate at 19.2 K Async OverSpeed				CTS Control
		Rate at 16.8 K				RTS/CTS Delay
		Rate at 14.4 K				LSD Control
		Rate at 12.0 K				XTXC Clamps TXC
		Rate at 9600				CT111 Control
		Rate at 7200				Rcv Remote Loop
		Rate at 4800				DTE RL (CT140)
		Rate at 2400				DTE LL (CT141)
						Port TXC Source
						DTE Alarm Mask
						Extend Main Ch.
*Not shown when the DTE Bridge configuration option is enabled.						Upstream Port
						495-14623-01

NOTE

The DTE Dialer, V.42/MNP/Buffer, and Security branches are not available in Multiport mode.

3920-A2-GN31-30 November 1996 4-9