COMSPHERE 392xPlus Modems
Options
The Options Status function displays all optional firmware features currently installed in the modem. If no firmware options are installed, None_Installed appears on the LCD.
To access Options from the Status branch, make the following sections:
Status: |
|
|
DTE |
| Options |
F1 | F2 | F3 |
Press the
key until Options appears. Select Options.
Options:Status >
V.29V.33
F1 F2 F3
If optional features are installed in the modem, they appear on the LCD's bottom line. If other
features are installed, press the 
key to scroll other features into view.
To exit this function and remain in the Status branch, press the 
key. To exit and return to the
key.
Record
Record is a troubleshooting tool used in conjunction with support personnel. This function retrieves and reports any sequence faults to support personnel. A sequence fault is an irregular or unexpected event.
There are two selections under Record: Display and Clear. Display allows up to eight sequence fault messages that are recorded by the modem and displayed on the LCD in descending order. If no sequence faults have occurred, then Modem O.K. appears.
Clear is used to remove all sequence fault messages from nonvolatile memory and the LCD.
To access Record from the Status branch, make the following selections:
Status:
Options Record
F1 F2 F3
Press the
key until Record appears. Select Record.
November 1996 |
