Paradyne 392xPLUS operation manual Figure G-9. Sample Configuration Ð Point-to-Point MSD

COMSPHERE 392xPlus Modems

Point-to-Point MSD

Figure G-9 shows a sample configuration for point-to-point MSD.

Figure G-9. Sample Configuration Ð Point-to-Point MSD

3920Plus A Use Sync Lease Answer Template default configuration options with the following exception:

Rate Refer to the Sample Port Rate Table in this section.

3920Plus B Use Sync Lease Originate Template default configuration options with the following exception:

MSD Control	Set Ports 1, 2, and 3 to Enable.
Rate	Refer to the Sample Port Rate Table in this section.

Cables

Cable 1 Use a standard, customer-supplied, EIA-232-D/V.24 cable with a DB-25-P (plug) connector at one end to attach to the modem. Attach this to the connector labeled DTE1, 2, 3, or 4.

Cable 2 Use part number 125-0053-1431 (an 8-position, 8-wire modular cord that is supplied with the modem). Attach this to the connector labeled LEASED.

Cable 3 Use part number 818-2759-0111 or an equivalent customer-supplied, EIA-232-D/V.24 crossover cable with DB-25-P (plug) connectors on both ends to attach to the modems. (See Appendix C for pin assignments.)

G-18 November 1996 3920-A2-GN31-30