Paradyne 392xPLUS operation manual S66

AT Command Set and S-Registers

Table 5-3

(8 of 12)

392xPlus S-Registers

S-Register		Description	DCP LCD
			Command
			Sequence
S66	NMS Call Messages. Register determines if the modem sends information		Configure\Edit\
	regarding status (Call Progress) and/or sends summarized call statistics (Call		Misc
	Connect) to the 6700 Series Network Management System (NMS).
	Register has the following values:
	0	= Call Connect & Progress
	1	= Disable
	2	= Call Connect Only
	3	= Call Progress Only
	The factory setting is Call Connect & Progress.
S67	Directory Location 1 Callback. Register determines if the modem uses the		Configure\Edit\
	single number callback function.		Misc
	Register has the following values:
	0	= Disable
	1	= Enable
	The factory setting is Disable.
S69	Make Busy Via DTR. Register determines if the modem goes off-hook (busy)		Configure\Edit\
	when DTR is OFF.		Line Dialer
	Register has the following values:
	0	= Disable
	1	= Enable
	The factory setting is Disable.
S70	V.27bis Train. Register controls the train time for V.27bis operation.		Configure\Edit\
	Register has the following values:		Leased Line
	0	= Short
	1	= Long
	The factory setting is Short.
S71	XTXC Clamps TXC. Register allows the modem's TXC output to be clamped		Configure\Edit\
	off when TX Clock Source is configured for External.		DTE Interface
	Register has the following values:
	0	= Enable
	1	= Disable
	The factory setting is Enable.
S72	RTS Antistreaming. Register determines the antistreaming operation of the		Configure\Edit\
	modem.		DTE Interface
	Register has the following values:
	0	= Disable
	1	= 10 sec
	2	= 30 sec
	3	= 1 min
	4	= 2 min
	5	= 3 min
	6	= 5 min
	The factory setting is Disable.

3920-A2-GN31-30 November 1996 5-23