COMSPHERE 392xPlus Modems
The following provides information about the Quick Configuration LCD display.
a | Displays the network position of the modem. The letter C indicates this is a |
| control modem, and T indicates this is a tributary modem. |
bbbDisplays the network management address of the modem. The valid address field range is from 001 to 256.
c | Displays the DTE mode. The letter A indicates the currently selected port is in | |
| Asynchronous mode, and S indicates the currently selected port is in Synchronous | |
| mode. If the NMS channel is selected, the letter in this location (A or S) will | |
| indicate the status of Port 1. (The NMS channel is always in Asynchronous | |
| mode.) |
|
dd | Displays the line mode. The letters LA indicate Leased Answer mode, LO | |
| indicate Leased Originate mode, and D indicates Dial mode. | |
ee | Displays the modem DTE port that currently appears by the EIA status indicators | |
| on the DCP. |
|
| CC | indicates Control Channel. |
| DC | indicates Diagnostic Channel. |
| P1 | indicates Port 1 in Singleport mode. |
| The following only appear on the 392x multiport modem: | |
| M1 | indicates Port 1 when TDM/MSD is enabled. |
| M2 | indicates Port 2 when TDM/MSD is enabled. |
| M3 | indicates Port 3 when TDM/MSD is enabled. |
| M4 | indicates Port 4 when TDM/MSD is enabled. |
| B1 | indicates Port 1 when DTE Bridge is enabled. |
| B2 | indicates Port 2 when DTE Bridge is enabled. |
ffff | Displays the modem's modulation scheme as shown below: | |
| V34 | indicates V.34 family modulation. |
| V32t | indicates V.32 terbo modulation. |
| V32b | indicates V.32bis modulation. |
| V32 | indicates V.32 modulation. |
| TMp | indicates Trellis Multipoint modulation. |
| V22b | indicates V.22bis modulation. |
| V27b | indicates V.27bis modulation. |
| V33 | indicates V.33 modulation. |
| V29 | indicates V.29 modulation. |
| V22 | indicates V.22 modulation. |
| V23 | indicates V.23 modulation. |
| V21 | indicates V.21 modulation. |
| 212A | indicates Bell 212A modulation. |
| 103J | indicates Bell 103J modulation. |
xxxxModem Transmit Rate indicates the rate at which the modem is transmitting data. Possible values are 2400, 4800, 7200, 9600, 12.0 (12,000), 14.4 (14,400),
16.8 (16,800), 19.2 (19,200), 21.6 (21,600), 24.0 (24,000), 26.4 (26,400),
28.8 (28,800), 31.2 (31,200), or 33.6 (33,600) bps.
yyyyySymbol Rate indicates the baud rate used by V.34 modulation. Refer to CCITT specifications. Possible values are 3429, 3200L, 3200H, 3000L, 3000H, 2800L, 2800H, 2743L, 2743H, 2400L, 2400H.
zz | Transmit Level indicates the power level at which the modem is transmitting |
| when running V.34 modulation. Possible values are 01± 64 dBm. |
To exit the Quick Configuration function and return to the
or 
key.
, 
,
November 1996 |
