DCP Operation
Leased:28.8
PList Control
F1 F2 F3
Press the
key until PList appears. Select PList.
Within a network link, a control modem can communicate with a tributary modem by using the tributary modem's network management address for polling functions. Each TMp tributary modem must have a different network management address. Refer to the Misc section in Chapter 4 for a description of the network management address (NetMngmtAddress) configuration option.
Over a diagnostic channel a tributary modem can communicate with control modems by using the control modem's network management address for polling.
In the poll list, modems are listed as either Active or Skip. Downstream modems in the Active poll list are polled by the modem. Modems in the Skip poll list are passed over during the polling process, but not deleted from the poll list.
Display
Display allows you to view the modem's poll list.
To access Display from the PList branch, make the following selection:
Poll List: |
| > |
Display |
| Clear |
F1 | F2 | F3 |
Select Display.
NOTE
If there are no modems in the poll list when you select Display, the message Poll List Empty! appears on the second line of the LCD.
| Poll | List:Disp |
|
| Nxt | xxx | yyyyyy |
| F1 | F2 | F3 |
If there are modems in the poll list when you select Display, | |||
xxx | Displays the network management address of the modem in the poll list. | ||
yyyyyyDisplays either Active or Skip to indicate the poll list in which the network management address is included.
November 1996 |
