Paradyne 392xPLUS operation manual DTE Dialer Configuration Options Ð Singleport Mode a

DCP Configuration

Table 4-8

(5 of 5)

DTE Dialer Configuration Options Ð Singleport Mode A

V25bis IdleFill: Mark

Nxt Mark Flag

This configuration option only appears when DTE Dialer is configured for V.25bis HDLC.

V.25bis Idle Fill. Determines whether a mark or flag is used as an idle fill character for the DTE. The modem responds to the DTE using the same idle fill.

The AT command is S-Register S63=n, where n is 0 for Mark or 1 for Flag.

V25b NewLineChr: CR+LF

End CR+LF CR LF

This configuration option only appears when DTE Dialer is configured for V.25bis Async.

V.25bis New Line Character. Sets the modem for the command line terminator used by the DTE in V.25bis Async mode. The modem responds to the DTE using the same line terminator.

The AT command is S-Register S64=n, where n is 0 for carriage return and line feed, 1 for carriage return, or 2 for line feed.

3920-A2-GN31-30 November 1996 4-45