DCP Operation

The Top-Level menu's main branches appear on the LCD in the order of Status, Configure, Control, Test, Call Setup, Talk/Data, Security, and Remote. These branches are discussed in this chapter except for the Configure branch which is reserved for Chapter 4, DCP Configuration, and the Security branch which is reserved for Chapter 6, Dial Access Security.

Quick Configuration Display

The Quick Configuration display indicates the basic operational characteristics of the modem.

Leased:28.8

Status Configure

F1 F2 F3

The modem's Quick Configuration information appears on the LCD's bottom line.

To access the Quick Configuration display from the Top-Level display, press the on the configuration of the modem, one of two screens appear.

If the modem is not operating with V.34 modulation, the following screen appears.

key. Based

Leased:19.2 > abbb cdd ee f f f f

F1 F2 F3

If the modem is operating with V.34 modulation, the following screen appears.

xxxx yyyyy zz > abbb cdd ee f f f f

F1 F2 F3

The V.34 modulation Quick Configuration information appears on the LCD's top line.

NOTE

In Dial mode, where Automode automatically adapts to the modulation scheme of the remote modem, the V.34 Quick Configuration display may not necessarily indicate the actual (V.34) online modulation.

For more information on V.34, refer to the V.34 section in this chapter.

3920-A2-GN31-30

November 1996

3-15

Page 52
Image 52
Paradyne 392xPLUS operation manual Quick Configuration Display, Leased28.8 Status Configure, Leased19.2 abbb cdd ee f f f f