SCarefully plan your sawing operation in ad- vance. Do not start cutting until you have a clear work area, secure footing, and, if you are felling trees, a planned retreat path.

OPERATE YOUR SAW SAFELY

SDo not operate a chain saw with one hand. Serious injury to the operator, helpers, by- standers or any combination of these per- sons may result from one-handed opera-

tion. A chain saw is intended for two-handed use.

SOperate the chain saw only in a well-venti-

lated outdoor area.

SDo not operate saw from a ladder or in a

tree.

SMake sure the chain will not make contact with any object while starting the engine. Never try to start the saw when the guide bar is in a cut.

SDo not put pressure on the saw at the end of the cut. Applying pressure can cause you to lose control when the cut is com- pleted.

S Stop the engine before setting the saw down.

SDo not operate a chain saw that is dam- aged, improperly adjusted, or not com- pletely and securely assembled. Always replace bar, chain, hand guard, or chain brake immediately if it becomes damaged, broken or is otherwise removed.

SWith the engine stopped, hand carry the chain saw with the muffler away from your body, and the guide bar and chain to the rear, preferably covered with a scabbard.

MAINTAIN YOUR SAW IN GOOD WORKING ORDER

SHave all chain saw service performed by a qualified service dealer with the exception of the items listed in the maintenance sec- tion of this manual. For example, if improp- er tools are used to remove or hold the fly- wheel when servicing the clutch, structural damage to the flywheel can occur and

cause the flywheel to burst.

SMake certain the saw chain stops moving when the throttle trigger is released. For correction, refer to CARBURETOR AD-

JUSTMENT.

SNever modify your saw in any way.

SKeep the handles dry, clean, and free of oil

or fuel mixture.

SKeep fuel and oil caps, screws, and fas- teners securely tightened.

SUse only Poulan PROR accessories and replacement parts as recommended.

HANDLE FUEL WITH CAUTION

SDo not smoke while handling fuel or while operating the saw.

SEliminate all sources of sparks or flame in the areas where fuel is mixed or poured.

There should be no smoking, open flames, or work that could cause sparks. Allow en- gine to cool before refueling.

SMix and pour fuel in an outdoor area on bare ground; store fuel in a cool, dry, well ventilated place; and use an approved, marked container for all fuel purposes.

Wipe up all fuel spills before starting saw.

SMove at least 10 feet (3 meters) from fuel-

ing site before starting engine.

STurn the engine off and let saw cool in a non-combustible area, not on dry leaves, straw, paper, etc. Slowly remove fuel cap and refuel unit.

SStore the unit and fuel in an area where fuel vapors cannot reach sparks or open flames from water heaters, electric motors or switches, furnaces, etc.

KICKBACK

WARNING: Avoid kickback which can result in serious injury. Kickback is the backward, upward or sudden forward motion of the guide bar occurring when the saw chain near the upper tip of the guide bar con- tacts any object such as a log or branch, or when the wood closes in and pinches the saw chain in the cut. Contacting a foreign ob- ject in the wood can also result in loss of chain saw control.

SRotational Kickback can occur when the moving chain contacts an object at the up- per tip of the guide bar. This contact can cause the chain to dig into the object, which stops the chain for an instant. The result is a lightning fast, reverse reaction which kicks the guide bar up and back to- ward the operator.

SPinch-Kickbackcan occur when the the wood closes in and pinches the moving saw chain in the cut along the top of the guide bar and the saw chain is suddenly stopped. This sudden stopping of the chain results in a reversal of the chain force used to cut wood and causes the saw to move in the opposite direction of the chain rotation. The saw is driven straight back toward the operator.

S Pull-Incan occur when the moving chain contacts a foreign object in the wood in the cut along the bottom of the guide bar and the saw chain is suddenly stopped. This sudden stopping pulls the saw forward and away from the operator and could easily cause the operator to lose control of the saw.

Avoid Pinch-Kickback:

S Be extremely aware of situations or ob- structions that can cause material to pinch the top of or otherwise stop the chain.

SDo not cut more than one log at a time.

SDo not twist the saw as the bar is with- drawn from an undercut when bucking.

Avoid Pull-In:

SAlways begin cutting with the engine at full speed and the saw housing against wood.

S Use wedges made of plastic or wood. Never use metal to hold the cut open.

Kickback Path

3

Page 3
Image 3
Poulan 530165555-01 Operate Your SAW Safely, Maintain Your SAW in Good Working Order, Handle Fuel with Caution, Kickback

530165555-01 specifications

The Poulan 530165555-01 is a robust and versatile chainsaw designed for both professional landscapers and home users seeking reliable performance for various cutting tasks. Renowned for its durability and efficiency, this model combines modern technology with user-friendly features to ensure a seamless cutting experience.

One of the standout characteristics of the Poulan 530165555-01 is its powerful engine. Equipped with a potent 50cc two-stroke engine, it offers a balance of power and lightweight design, making it suitable for prolonged use without causing excessive fatigue. The engine is designed for optimal fuel efficiency, enabling users to accomplish more tasks with less refueling. This is particularly beneficial for those who need to tackle larger jobs or for professional users who rely on their equipment for daily workloads.

The chainsaw features an adjustable automatic oiling system, which ensures that the bar and chain are consistently lubricated. This system helps to enhance the lifespan of the cutting components while also minimizing friction and heat during operation. The 20-inch bar length is ideal for a variety of cutting tasks, from felling trees to trimming branches, offering versatility for different projects.

Safety is a top priority with the Poulan 530165555-01, and it includes several safety features designed to protect the user. The chain brake provides an immediate stop in the event of kickback, while the anti-vibration system reduces operator fatigue, allowing for longer periods of safe operation. Furthermore, the easy-start technology makes it simple for users of all experience levels to start the chainsaw with minimal effort, reducing the frustration often associated with traditional pull-start mechanisms.

Another notable feature is the tool-less chain tensioning system, which allows users to make quick adjustments to the chain tension without the need for additional tools. This innovation enhances convenience and empowers users to maintain optimal cutting performance on the fly.

In summary, the Poulan 530165555-01 is a well-rounded chainsaw that blends power, safety, and ease of use. Whether you're a seasoned professional or a homeowner tackling seasonal yard work, the combination of its durable construction, efficient operation, and user-friendly features makes it a reliable choice for various cutting needs. With this chainsaw in hand, users can confidently take on any task, knowing they have a dependable tool at their disposal.