6.Place chain over and behind the clutch retainer, fitting the drive links in the clutch drum sprocket.

7.Fit bottom of drive links between the teeth in the sprocket in the nose of the guide bar.

8.Fit chain drive links into bar groove.

9.Pull guide bar forward until chain is snug in guide bar groove. Ensure all drive links are in the bar groove.

10.Hold guide bar against the saw frame and install clutch cover.

11.Install bar nuts and finger tighten only. Once the chain is tensioned, you will need to tighten bar nuts.

CHAIN TENSION

(Including units with chain already installed)

WARNING: Wear protective gloves when handling chain. The chain is sharp and can cut you even when it is not moving.

NOTE: When adjusting chain tension, make sure the chain brake nuts are finger tight only. Attempting to tension the chain when the chain brake nuts are tight can cause damage.

Checking the tension:

Use the screwdriver end of the chain adjust- ment tool (bar tool) to move chain around guide bar. If the chain does not rotate, it is too tight. If the chain is too loose, it will sag below the bar.

Guide

 

Bar

 

Chain Adjustment

Bar Nuts

Tool

(Bar Tool)

 

Adjusting the tension:

Chain tension is very important. Chains stretch during use. This is especially true during the first few times you use your saw. Always check chain tension each time you use and refuel your saw.

An adjusting screw (located on the guide bar) is used to adjust the tension of the chain (see illustration).

1.Turn adjusting screw clockwise until chain solidly contacts bottom of guide bar rail.

Guide bar

Adjusting

Screw

2.Using bar tool, roll chain around guide bar to ensure all links are in bar groove.

3.Lift up tip of guide bar to check for sag. Release tip of guide bar, then turn ad- justing screw clockwise until sag does not exist.

4.While lifting tip of guide bar, tighten bar nuts securely with the bar tool.

Bar Nuts

5.Use the screwdriver end of the bar tool to move chain around guide bar.

6.If chain does not rotate, it is too tight. Slightly loosen bar nuts and loosen chain by turning the adjusting screw. Retighten bar nuts.

7.If chain is too loose, it will sag below the guide bar. DO NOT operate the saw if the chain is loose.

WARNING: If the saw is operated with a loose chain, the chain could jump off the guide bar and result in serious injury.

7

Page 6 Page 8
Page 7
Image 7
Poulan 530165555-01 instruction manual Chain Tension, Checking the tension, Adjusting the tension
Page 6 Page 8

530165555-01 specifications

The Poulan 530165555-01 is a robust and versatile chainsaw designed for both professional landscapers and home users seeking reliable performance for various cutting tasks. Renowned for its durability and efficiency, this model combines modern technology with user-friendly features to ensure a seamless cutting experience.

One of the standout characteristics of the Poulan 530165555-01 is its powerful engine. Equipped with a potent 50cc two-stroke engine, it offers a balance of power and lightweight design, making it suitable for prolonged use without causing excessive fatigue. The engine is designed for optimal fuel efficiency, enabling users to accomplish more tasks with less refueling. This is particularly beneficial for those who need to tackle larger jobs or for professional users who rely on their equipment for daily workloads.

The chainsaw features an adjustable automatic oiling system, which ensures that the bar and chain are consistently lubricated. This system helps to enhance the lifespan of the cutting components while also minimizing friction and heat during operation. The 20-inch bar length is ideal for a variety of cutting tasks, from felling trees to trimming branches, offering versatility for different projects.

Safety is a top priority with the Poulan 530165555-01, and it includes several safety features designed to protect the user. The chain brake provides an immediate stop in the event of kickback, while the anti-vibration system reduces operator fatigue, allowing for longer periods of safe operation. Furthermore, the easy-start technology makes it simple for users of all experience levels to start the chainsaw with minimal effort, reducing the frustration often associated with traditional pull-start mechanisms.

Another notable feature is the tool-less chain tensioning system, which allows users to make quick adjustments to the chain tension without the need for additional tools. This innovation enhances convenience and empowers users to maintain optimal cutting performance on the fly.

In summary, the Poulan 530165555-01 is a well-rounded chainsaw that blends power, safety, and ease of use. Whether you're a seasoned professional or a homeowner tackling seasonal yard work, the combination of its durable construction, efficient operation, and user-friendly features makes it a reliable choice for various cutting needs. With this chainsaw in hand, users can confidently take on any task, knowing they have a dependable tool at their disposal.
Top Page Image Contents