NOTE: A one-half twist is built in the shoul- der strap to allow the strap to rest flat on the shoulder.

3.Adjust the strap, allowing the hook to be about 3 -- 6 inches (8 -- 15 cm) below the waist.

4.Fasten the strap hook to the clamp lo- cated between the throttle handle and the assist handle and lift the tool to the oper- ating position.

NOTE: It may be necessary to relocate the shoulder strap clamp on the shaft for proper balancing of unit.

TO RELOCATE SHOULDER STRAP CLAMP:

1.Loosen and remove both clamp screws.

2.Place the upper shoulder strap clamp over the upper shaft.

3.Position the lower shoulder strap clamp under the upper shaft and align the upper and lower clamp screw holes.

Upper Shoulder

Strap Clamp

POWERHEAD

END

Lower Shoulder

ATTACHMENT

END

Strap Clamp

 

Screws

4.Insert two screws into the screw holes.

5.Secure shoulder strap clamp by tighten- ing screws with a hex wrench.

ADJUSTING THE ASSIST HANDLE

WARNING: When adjusting the as- sist handle, be sure it remains between the

coupler and the lower arrow (closest to coupler) on the safety label to ensure proper balancing of unit. When adjusting the assist handle or handlebar during use of optional at- tachments, it must be repositioned between

the throttle trigger and the upper arrow (closest to engine) on the safety label.

1.Loosen wing nut on handle.

2.Rotate the handle on the shaft to an up- right position; retighten wing nut.

ATTACHING SHIELD (FOR LINE TRIMMER ATTACHMENT)

WARNING: The shield must be prop- erly installed. The shield provides partial protec- tion from the risk of thrown objects to the opera- tor and others and is equipped with a line limiter blade which cuts excess line to the proper length. The line limiter blade (on underside of shield) is sharp and can cut you. For proper orientation of shield, see KNOW YOUR TRIM- MER illustration in OPERATION section.

1.Remove wing nut from shield.

2.Insert bracket into slot as shown.

3.Pivot shield until bolt passes through hole in bracket.

4.Securely tighten wing nut onto bolt.

Slot

Shield

Bracket

Line Limiter Blade

Wing

Nut

9

Page 9
Image 9
Poulan 545137280 instruction manual To Relocate Shoulder Strap Clamp, Adjusting the Assist Handle

545137280 specifications

The Poulan 545137280 is a versatile and powerful gas-powered chainsaw designed to meet the needs of both professionals and avid DIY enthusiasts. Renowned for its durability and efficiency, this chainsaw stands out in the crowded market due to its advanced technologies and ergonomic design.

One of the prominent features of the Poulan 545137280 is its 50cc, 2-stroke engine, which delivers a robust performance, making it ideal for cutting through heavy hardwoods and tackling demanding jobs. This engine not only provides ample power but also ensures that the chainsaw operates smoothly, resulting in less vibration for the user, which enhances comfort during extended use.

The chainsaw is equipped with a 20-inch bar and chain, providing an ideal length for a variety of cutting tasks, from felling trees to trimming branches. The larger bar allows users to cover more ground with each cut, thus increasing efficiency. The sharp chain is designed for optimum performance and quick cutting, ensuring cleaner finishes and reduced kickback for safer operation.

Another standout feature is Poulan’s patented Easy Start technology. This technology significantly reduces starting effort, allowing users to start the chainsaw with minimal effort, even in cold weather. Combined with the choke lever and primer bulb, this system ensures that the chainsaw is ready to go with just a few pulls, minimizing downtime before tackling the next cutting task.

In terms of safety, the Poulan 545137280 incorporates a chain brake system that automatically stops the chain if a kickback is detected, reducing the risk of accidents. The rear handle is ergonomically designed to provide a comfortable grip, allowing for better control during operation. Additionally, the lightweight design of the chainsaw helps reduce user fatigue, making it suitable for prolonged use.

Maintenance is made simple with the tool-less chain tensioning feature that enables users to adjust the chain tension without the need for additional tools. This not only saves time but also ensures that the chainsaw remains in optimal working condition without unnecessary hassle.

In summary, the Poulan 545137280 chainsaw combines power, efficiency, and user-friendly features that cater to both professionals and hobbyists. Its advanced technologies, including the powerful engine, Easy Start system, and enhanced safety features, make it a reliable tool for a variety of cutting tasks. Whether for yard maintenance or professional logging jobs, the Poulan 545137280 proves to be a valuable addition to any toolkit.