Inside view of Bar Clamp
Adjusting pin hole
Adjusting 
screw
Adjusting pin
8. Secure the guide bar and bar clamp with the bar clamp nuts; tighten finger tight only.
CAUTION: If saw chain is installed back- wards, the saw will vibrate excessively and will not cut wood.
CHAIN ADJUSTMENT
See CHECK CHAIN TENSION in the MAIN- TENANCE section.
CUSTOMER SERVICEABLE PARTS
WARNING: Use of any other ac- cessory or attachment might present a risk of injury to the operator.
REPLACEMENT PART | PART NO. |
|
|
Hex Nuts | 530015917 |
Oil Cap | 530053072 |
Bar Adjusting Screw | 530016265 |
Bar Adjusting Pin | 530053068 |
File (5/32″ dia.) Twin Pak | 952055085 |
Xtra GUARDr Chain | 952051470 |
952044759 | |
Bar & Chain Lubricant | 952030129 |
Bar & Chain Lubricant | 952030130 |
|
|
STORAGE | |
|
|
WARNING: Perform the following | SEASONAL STORAGE |
Prepare your unit for storage at the end of | |
steps after each use: | the season or if it will not be used for 30 |
S Allow motor to cool before storing or | days or more. |
transporting. | If your chain saw is to be stored for a |
S Store chain saw and extension cord in | period of time: |
a well ventilated area | S Clean it thoroughly before lengthy |
S Store chain saw with all guards in | storage. |
place and position chain saw so that | S Store in a clean dry area. |
any sharp object cannot accidentally | S Lightly oil external metal surfaces and |
cause injury. | guide bar. |
S Store chain saw unplugged, well out of | S Oil the chain and wrap it in heavy |
the reach of children. | paper or cloth. |
14
