Mowing

SWEEPING -- The fanning action of the rotat- ing line can be used for a quick and easy clean up. Keep the line parallel to and above

the surfaces being swept and move the tool from side to side.

Sweeping

MAINTENANCE

WARNING: Disconnect unit from power source before performing maintenance.

CHECK FOR LOOSE

FASTENERS AND PARTS

SBar clamp nut S Chain

S Bar adjusting screw S Housing screws

S Assist handle screw S Debris shield

CHECK FOR DAMAGED OR WORN PARTS

Contact an authorized service dealer for re- placement of damaged or worn parts.

STrigger switch -- Ensure trigger switch func- tions properly by pressing and releasing the trigger switch. Make sure motor starts and

stops.

SOil tank -- Discontinue use of unit if oil tank shows signs of damage or leaks.

INSPECT AND CLEAN UNIT AND LABELS

SAfter each use, inspect complete unit for

loose or damaged parts. Clean the unit and labels using a damp cloth.

SWipe off unit with a clean dry cloth.

CHECK CHAIN TENSION

WARNING: Wear protective gloves when handling chain. The chain is sharp and can cut you even when it is not moving. Make chain adjustments with lower end supported. Chain tension is very important. Chains stretch during use. This is especially true dur- ing the first few times you use your pruner. Al- ways check chain tension each time you use your unit.

1.Use the screwdriver end of the chain ad- justment tool (bar tool) to move chain around guide bar to ensure kinks do not exist. The chain should rotate freely.

Chain Adjustment Tool

Guide

Bar

2.Loosen bar clamp nut until it is finger tight against the bar clamp.

 

 

 

Adjusting Screw

Bar clamp nut

3.Turn adjusting screw clockwise until chain solidly contacts bottom of guide bar rail. Then, turn adjusting screw an addi- tional 1/4 turn.

Adjusting Screw -- 1/4 Turn

4.Using bar tool, roll chain around guide bar to ensure all links are in bar groove.

5.Lift up tip of guide bar to check for sag. Release tip of guide bar, then turn adjust- ing screw 1/4 turn clockwise. Repeat until sag does not exist.

6.While lifting tip of guide bar, tighten bar clamp nut securely with the bar tool.

7.Use the screwdriver end of the bar tool to move chain around guide bar.

8.If chain does not rotate, it is too tight. Slightly loosen bar clamp nut and loosen chain by turning the adjusting screw 1/4 turn counterclockwise. Retighten bar clamp nut.

9.If chain is too loose, it will sag below the guide bar and needs to be tightened fol- lowing above procedure.

WARNING: DO NOT operate the pruner if the chain is loose. If the pruner is oper- ated with a loose chain, the chain could jump off the guide bar and result in serious injury.

CHECK CHAIN SHARPNESS

A sharp chain makes wood chips. A dull chain makes a sawdust powder and cuts slowly. See CHAIN SHARPENING in the SERVICE AND ADJUSTMENTS section.

15

Page 15
Image 15
Poulan 810 EPT instruction manual Maintenance

810 EPT specifications

The Poulan 810 EPT is a high-performance chainsaw designed for both professional loggers and home landscaping enthusiasts alike. Known for its reliability and durability, this model stands out due to its advanced features and cutting-edge technology.

At the heart of the Poulan 810 EPT is a powerful 81cc, two-stroke engine. This robust engine delivers significant power for cutting through tough wood, making it suitable for heavy-duty tasks. With a guide bar length of up to 20 inches, it provides the ability to tackle big jobs efficiently. The chainsaw’s high speed allows for faster cutting, which is particularly beneficial for clearing trees or trimming large branches.

One of the key features of the Poulan 810 EPT is its EPT (Easy Pull Technology). This innovative system significantly reduces the effort needed to start the engine. It incorporates a spring-assisted starter that makes pull starts smoother and less strenuous. As a result, users can enjoy quicker and easier startups, which is especially advantageous during prolonged use.

Another notable aspect of the Poulan 810 EPT is its anti-vibration technology. This feature minimizes the vibrations felt by the user, leading to increased comfort during operation, even during extended tasks. Prolonged use can be taxing on the hands, but with this technology in place, users can maintain better control and reduce fatigue.

The chainsaw also comes equipped with a tool-less chain tensioning system, allowing for quick and easy adjustments on-the-go. This means that users can tighten or loosen the chain without the need for additional tools, ensuring optimal performance and safety during operation. The chain itself is designed for superior cutting efficiency and is specifically crafted to maintain sharpness for longer periods.

Safety is paramount in chainsaw design, and the Poulan 810 EPT incorporates several safety features. It includes a chain brake that engages instantly to prevent kickback injuries, as well as a throttle lockout to avoid accidental starts. These features are crucial for enhancing user safety while operating the machine.

Overall, the Poulan 810 EPT stands out as a powerful, efficient, and user-friendly chainsaw. With its advanced engine technology, ease of use features, and safety mechanisms, it is an ideal option for those seeking a reliable tool for both professional and personal woodcutting tasks.