of this tool and seek medical attention. An anti--vibration system does not guarantee the avoidance of these problems. Users who op- erate power tools on a continual and regular basis must monitor closely their physical con- dition and the condition of this tool.

RECOMMENDED ATTACHMENTS

This model is equipped with a coupler which enables optional attachments to be installed. The optional attachments are:

MODEL: Edger . . . . . . . . . . . . . . . . . . . . PP1000E Cultivator . . . . . . . . . . . . . . . . . PP2000T Blower . . . . . . . . . . . . . . . . . . . PP3000B

WARNING: Use of any other attach- ments besides those listed above and the at- tachment provided with this unit might present a risk of injury to the operator or bystanders. Only those attachments listed above and the attach- ment provided with this unit have been tested for use with this powerhead.

ADDITIONAL SAFETY RULES

FOR OPTIONAL ATTACHMENTS

WARNING: For each optional attach- ment used, read entire instruction manual be- fore use and follow all warnings and instruc- tions in manual and on attachment.

NOTE: Use the assist handle included with your unit (as shown below) when operating the following attachments.

Assist Handle

BLOWER SAFETY

WARNING: Never put hands or other objects into blower housing to avoid serious injury from rotating impeller.

WARNING: Inspect area before starting unit. Remove all debris and hard ob- jects such as rocks, glass, wire, etc. that can ricochet, be thrown, or otherwise cause injury or damage during operation.

S Inspect unit before each use for worn, loose, missing or damaged parts. Do not use until unit is in proper working order.

SDo not set unit on any surface except a clean, hard area. Debris such as gravel, sand, dust, grass, etc., could be picked up by the air in- take and thrown out through discharge open- ing, damaging unit, property, or causing seri-

ous injury to bystanders or operator.

SNever place objects inside the blower tubes or blower outlet. Always direct the blowing debris away from people, animals, glass, and solid objects such as trees, automo-

biles, walls, etc. The force of air can cause rocks, dirt, or sticks to be thrown or to rico- chet which can hurt people or animals, break glass, or cause other damage.

SCheck air intake opening and blower tubes frequently, always with unit stopped and power source disconnected. Keep vents

and discharge tubes free of debris which can accumulate and restrict proper air flow.

SNever place any object in air intake opening as this could restrict proper air flow and

cause damage to the unit.

SNever douse or squirt the unit with water or any other liquid. Clean unit and labels with a

damp sponge. Keep handles dry, clean, and free from oil and grease.

SNever use for spreading chemicals, fertiliz- ers, or other substances which may contain toxic materials.

STo avoid spreading fire, do not use near leaf or brush fires, fireplaces, barbecue pits, ashtrays, etc.

CULTIVATOR SAFETY

DANGER: RISK OF CUT. KEEP HANDS AND FEET AWAY FROM TINES AND CUTTING AREA. Rotating tines can cause se- rious injury. Do not attempt to clear away cut material or hold material to be cut when the mo- tor is running. Make sure powerhead is stopped and disconnected from power source when re- moving jammed material from the tines. Do not grab or hold attachment by the tines.

WARNING: Rotating tines can cause serious injury. Keep away from rotating tines. Stop the unit and disconnect the power source before unclogging tines or making repairs.

WARNING: Inspect the area to be cultivated before starting the unit. Remove all debris and hard and sharp objects such as rocks, vines, branches, rope, string, etc.

SHold the unit firmly with both hands

SKeep firm footing and balance. Do not over-

reach or stand on unstable surfaces.

SLook behind and use care when backing up. S Keep all parts of your body away from the

tines.

S Never operate the cultivator without the tine guard in place and properly secured.

S Keep the tines and guard clear of debris. Al- ways wear gloves when servicing or clean- ing the tines. The tines become very sharp from use.

S Avoid heavy contact with solid objects that might stop the tines. If heavy contact oc- curs, stop the motor and inspect the unit for damage.

S After striking a foreign object, stop the unit, disconnect the power source and inspect the cultivator for damage. Repair before re- starting.

S Disconnect attachment from the drive mo- tor before cleaning the tines with a hose and water to remove any build--up. Oil the tines to prevent rust.

S Do not run unit at high speed unless cultiva- ting.

7

Page 7
Image 7
Poulan 810 EPT instruction manual Recommended Attachments, For Optional Attachments, Blower Safety, Cultivator Safety

810 EPT specifications

The Poulan 810 EPT is a high-performance chainsaw designed for both professional loggers and home landscaping enthusiasts alike. Known for its reliability and durability, this model stands out due to its advanced features and cutting-edge technology.

At the heart of the Poulan 810 EPT is a powerful 81cc, two-stroke engine. This robust engine delivers significant power for cutting through tough wood, making it suitable for heavy-duty tasks. With a guide bar length of up to 20 inches, it provides the ability to tackle big jobs efficiently. The chainsaw’s high speed allows for faster cutting, which is particularly beneficial for clearing trees or trimming large branches.

One of the key features of the Poulan 810 EPT is its EPT (Easy Pull Technology). This innovative system significantly reduces the effort needed to start the engine. It incorporates a spring-assisted starter that makes pull starts smoother and less strenuous. As a result, users can enjoy quicker and easier startups, which is especially advantageous during prolonged use.

Another notable aspect of the Poulan 810 EPT is its anti-vibration technology. This feature minimizes the vibrations felt by the user, leading to increased comfort during operation, even during extended tasks. Prolonged use can be taxing on the hands, but with this technology in place, users can maintain better control and reduce fatigue.

The chainsaw also comes equipped with a tool-less chain tensioning system, allowing for quick and easy adjustments on-the-go. This means that users can tighten or loosen the chain without the need for additional tools, ensuring optimal performance and safety during operation. The chain itself is designed for superior cutting efficiency and is specifically crafted to maintain sharpness for longer periods.

Safety is paramount in chainsaw design, and the Poulan 810 EPT incorporates several safety features. It includes a chain brake that engages instantly to prevent kickback injuries, as well as a throttle lockout to avoid accidental starts. These features are crucial for enhancing user safety while operating the machine.

Overall, the Poulan 810 EPT stands out as a powerful, efficient, and user-friendly chainsaw. With its advanced engine technology, ease of use features, and safety mechanisms, it is an ideal option for those seeking a reliable tool for both professional and personal woodcutting tasks.