SDo not put pressure on the pruner at the end of the cut. Applying pressure can cause you to lose control when the cut is completed.

SDo not run the unit at high speed when not pruning.

SIf you strike or become entangled with a for- eign object, stop the engine immediately and check for damage. Have any damage re- paired by an authorized service dealer before attempting further operations.

SDo not operate a pruner that is damaged, im- properly adjusted, or not completely and se- curely assembled. Always replace bar and chain immediately if it becomes damaged,

broken or is otherwise removed.

SAlways stop the unit when work is delayed or when walking from one cutting location to another. Stop the engine before setting the

unit down.

SUse only in daylight or good artificial light. S Use only for jobs explained in this manual.

KICKBACK

WARNING: Avoid kickback which can result in serious injury. Kickback is the backward, upward or sudden forward motion of the guide bar occurring when the chain near the upper tip of the guide bar contacts any object such as a log or branch, or when the wood closes in and pinches the chain in the cut. Contacting a foreign object in the wood can also result in loss of control.

S Rotational Kickback can occur when the moving chain contacts an object at the upper tip of the guide bar. This contact can cause the chain to dig into the object, which stops the chain for an instant. The result is a light- ning fast, reverse reaction which kicks the guide bar up and back toward the operator.

SPinch-Kickbackcan occur when the wood closes in and pinches the moving chain in the cut along the top of the guide bar and the chain is suddenly stopped. This sudden stopping of the chain results in a reversal of the chain force used to cut wood and causes the pruner to move in the opposite direction of the chain rotation. The pruner is driven straight back toward the operator.

S Pull-Incan occur when the moving chain contacts a foreign object in the wood in the cut along the bottom of the guide bar and the chain is suddenly stopped. This sudden stop- ping pulls the pruner forward and away from the operator and could easily cause the oper- ator to lose control of the pruner.

REDUCE THE CHANCE OF

KICKBACK

SRecognize that kickback can happen. With a basic understanding of kickback, you can reduce the element of surprise which con- tributes to accidents.

SNever let the moving chain contact any ob-

ject at the tip of the guide bar.

SKeep the working area free from obstruc- tions such as other trees, branches, rocks, stumps, etc. Eliminate or avoid any obstruction that your chain could hit while you are cutting. When cutting a branch, do

not let the guide bar contact branch or other objects around it.

S Keep your chain sharp and properly ten- sioned. A loose or dull chain can increase the chance of kickback occurring. Follow man- ufacturer’s chain sharpening and mainte- nance instructions. Check tension at regular intervals with the engine stopped, never with the engine running. Make sure the bar clamp nut is securely tightened after tensioning the chain.

SBegin and continue cutting at full speed. If

the chain is moving at a slower speed, there is greater chance of kickback occurring.

SCut one branch at a time.

S Use extreme caution when re-entering a previous cut.

SDo not attempt cuts starting with the tip of the bar (plunge cuts).

SWatch for shifting of wood or other forces that could close a cut and pinch or fall into chain.

SUse the Reduced--Kickback Guide Bar and Low--Kickback Chain specified for your unit.

MAINTAIN CONTROL

SKeep a good, firm grip on the pruner with both hands when the engine is running and don’t let go. A firm grip will help you reduce kickback and maintain control. Keep the fin- gers of your left hand encircling and your left thumb under the assist handle. Keep your right hand completely around the

throttle handle whether your are right hand- ed or left handed.

SStand with your weight evenly balanced on both feet.

SStand slightly to the left side of the pruner to keep your body from being in a direct line with the cutting chain.

KICKBACK SAFETY FEATURES

The following features are included on your pruner to help reduce the hazard of kickback; however, such features will not totally eliminate this danger. As a pruner user, do not rely only on safety devices. You must follow all safety precautions, instructions, and maintenance in this manual to help avoid kickback and other forces which can result in serious injury.

SReduced--Kickback Guide Bar, designed with a small radius tip which reduces the size of the kickback danger zone on the bar tip.

5

Page 4 Page 6
Page 5
Image 5
Poulan 115261026, 952711612 instruction manual Reduce the Chance Kickback, Maintain Control, Kickback Safety Features
Page 4 Page 6

115261026, 952711612 specifications

The Poulan 952711612 and 115261026 represent two of the most proficient trimmer heads in Poulan’s extensive lineup, known for their reliability and performance in lawn maintenance. Both models are designed to optimize the efficiency of string trimmers, catering to the needs of both casual gardeners and professional landscapers.

One of the standout features of the Poulan 952711612 is its advanced design, which allows for easy line loading. This innovative design not only saves time during setup but also enhances the overall user experience by reducing frustration during maintenance. The 952711612 utilizes a dual-line system that increases productivity by cutting a wider swath of grass with each pass, making it ideal for tackling larger areas of overgrowth.

In addition, the Poulan 115261026 boasts a similar dual-line feature, but it is particularly noted for its bump feed mechanism. This technology permits the user to feed additional line simply by tapping the bottom of the trimmer head against the ground. This hands-free operation is invaluable for maintaining continuous workflow, especially when trimming around edges and in hard-to-reach spots.

Both models are constructed with durable materials, ensuring long-lasting performance even when subjected to demanding conditions. The robust design minimizes wear and extends the lifespan of the trimmer heads, making them a worthwhile investment for any user. The trimmer heads are lightweight, which reduces fatigue during use, allowing for prolonged periods of trimming without discomfort.

Moreover, compatibility is key for these models. The Poulan 952711612 and 115261026 are designed to fit a variety of Poulan trimmers, ensuring that users don't have to worry about purchasing additional equipment. This versatility is coupled with an easy installation process, making the transition from old trimmer heads seamless and hassle-free.

Overall, the Poulan 952711612 and 115261026 embody the brand’s commitment to delivering quality lawn care products. With user-friendly features, durable construction, and innovative technology, they serve as reliable tools for achieving a well-manicured lawn. Whether for routine yard work or tackling tougher landscaping jobs, these trimmer heads stand out as excellent choices in the outdoor power equipment market.
Top Page Image Contents