Reduced Kickback Symmetrical Guide Bar

Small Radius Tip

Symmetrical Guide Bar

Large Radius Tip

SLow--Kickback Chain, designed with a con- toured depth gauge and guard link which deflect kickback force and allow wood to gradually ride into the cutter.

Contoured Depth Gauge

 

Elongated Guard Link

 

Deflects

Low--- Kickback

kickback force

and allows wood

Chain

to gradually ride

 

into cutter

 

Can Obstruct Material

Not a Low--- Kickback Chain

TRANSPORTING AND STORAGE

SDo not grasp or hold exposed blade.

SStop powerhead before leaving work area. S Allow powerhead and gearbox to cool before

storing or transporting it in a vehicle.

S Store unit and fuel in area where fuel vapors cannot reach sparks or open flames from wa- ter heaters, electric motors or switches, fur- naces, etc.

S Store attachment so blade cannot accidental- ly cause injury.

S Store attachment indoors, out of reach of chil- dren.

If situations occur which are not covered in this manual, use care and good judgment. If you need assistance, call 1-800-554-6723.

SPECIAL NOTICE: Exposure to vibrations through prolonged use of gasoline powered hand tools could cause blood vessel or nerve damage in the fingers, hands, and joints of people prone to circulation disorders or abnor- mal swellings. Prolonged use in cold weather has been linked to blood vessel damage in otherwise healthy people. If symptoms occur such as numbness, pain, loss of strength, change in skin color or texture, or loss of feeling in the fingers, hands, or joints, discontinue the use of this tool and seek medical attention. An anti-vibration system does not guarantee the avoidance of these problems. Users who oper- ate power tools on a continual and regular basis must monitor closely their physical condition and the condition of this unit.

SAVE THESE INSTRUCTIONS

ASSEMBLY

WARNING: If received assembled, repeat all steps to ensure your unit is properly assembled and all fasteners are secure.

Examine parts for damage. Do not use dam- aged parts.

NOTE: If you need assistance or find parts missing or damaged, call 1-800-554-6723.

TOOLS REQUIRED

SHex wrench (provided)

INSTALLING PRUNER ATTACH- MENT

CAUTION: When removing or installing at- tachments, place the unit on a flat surface for stability.

1.Loosen the coupler by turning the knob counterclockwise.

Coupler

AttachmentLOOSEN

Knob

TIGHTEN

2.Remove the shaft cap from the pruner at- tachment (if present).

3.Position locking/release button of attach- ment into guide recess of coupler.

4.Push the attachment into the coupler until the locking/release button snaps into the primary hole.

5.Before using the unit, tighten the knob se- curely by turning clockwise.

Coupler Primary Hole

Guide Recess

Locking/

Upper Release Attachment

Shaft Button

WARNING: Make sure the locking/ release button is locked in the primary hole and the knob is securely tightened before op- erating the unit. Using the wrong hole could lead to serious injury or damage to the unit.

6

Page 5 Page 7
Page 6
Image 6
Poulan 952711612, 115261026 Assembly, Transporting and Storage, Tools Required, Installing Pruner ATTACH- Ment
Page 5 Page 7

115261026, 952711612 specifications

The Poulan 952711612 and 115261026 represent two of the most proficient trimmer heads in Poulan’s extensive lineup, known for their reliability and performance in lawn maintenance. Both models are designed to optimize the efficiency of string trimmers, catering to the needs of both casual gardeners and professional landscapers.

One of the standout features of the Poulan 952711612 is its advanced design, which allows for easy line loading. This innovative design not only saves time during setup but also enhances the overall user experience by reducing frustration during maintenance. The 952711612 utilizes a dual-line system that increases productivity by cutting a wider swath of grass with each pass, making it ideal for tackling larger areas of overgrowth.

In addition, the Poulan 115261026 boasts a similar dual-line feature, but it is particularly noted for its bump feed mechanism. This technology permits the user to feed additional line simply by tapping the bottom of the trimmer head against the ground. This hands-free operation is invaluable for maintaining continuous workflow, especially when trimming around edges and in hard-to-reach spots.

Both models are constructed with durable materials, ensuring long-lasting performance even when subjected to demanding conditions. The robust design minimizes wear and extends the lifespan of the trimmer heads, making them a worthwhile investment for any user. The trimmer heads are lightweight, which reduces fatigue during use, allowing for prolonged periods of trimming without discomfort.

Moreover, compatibility is key for these models. The Poulan 952711612 and 115261026 are designed to fit a variety of Poulan trimmers, ensuring that users don't have to worry about purchasing additional equipment. This versatility is coupled with an easy installation process, making the transition from old trimmer heads seamless and hassle-free.

Overall, the Poulan 952711612 and 115261026 embody the brand’s commitment to delivering quality lawn care products. With user-friendly features, durable construction, and innovative technology, they serve as reliable tools for achieving a well-manicured lawn. Whether for routine yard work or tackling tougher landscaping jobs, these trimmer heads stand out as excellent choices in the outdoor power equipment market.
Top Page Image Contents