Installation Instructions (Continuous)
8.INSTALL THE AIR CONDITIONER IN THE CASE
A.Slide the air conditioner into the case. Do not push on the controls or the finned coils. Make sure the air conditioner is firmly seated.
B.Reinstall the locking bracket and screw removed earlier.
C.Reconnect the ground wire to the air conditioner using the screw removed earlier.
IMPORTANT: The ground wire must be reinstalled to ensure a proper ground.
D.Remove the front grille from its box and remove the shipping tape.
E.Grasp the inlet grille at the bottom corners and pull it forward. Unhook it from its top hinges and set it aside.
F.Using the tab, pull up slightly on the filter to release it and pull it down and out.
8.INSTALL THE AIR CONDITIONER IN THE CASE (cont.)
G.Pull the coiled power cord from its shipped position in the air discharge area. Attach the front grille frame to the case by inserting the tabs on the grille frame into the slots on the front top of the case. Push the grille frame in. And install the 2 side screws at bottom left and right side of front panel.
H.Secure the front grille frame to the case with one type C screw.
I.Reinstall the filter.
J.Reinstall the inlet grille. J Connect power.
11
