Notes
Notes
Notas
See Warranty on page 6 for important information about commercial use of this product.
Operating Instructions and Parts Manual | DG190600CK S |
|
|
Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or property damage! Retain instructions for future reference.
BUILT TO LAST
Variable Speed Hammer Drill
Description
Hammer drills provide short, rapid hammer thrusts at the same time the bit turns. By adding impact to the drilling tip, the material is actually pulverized, increasing the efficiency of the drilling process and keeping the tip of the bit cooler. This hammer drill can be used in a normal drilling mode as well. Other features include
Unpacking
When unpacking this product, carefully inspect for any damage that may have occurred during transit.
General Safety
Information
This manual contains information that is very important to know and understand. This information is provided for SAFETY and to PREVENT EQUIPMENT PROBLEMS. To help recognize this information, observe the following symbols.
Danger indicates
! DANGER an imminently hazardous situation which, if not avoided, will result in death or serious injury.
Warning indicates
! WARNING a potentially hazardous situation which, if not avoided, could result in death or serious injury.
Caution indicates a
! CAUTION potentially hazardous situation which, if not avoided, may result in minor or moderate injury.
Notice indicates
NOTICE important information, that if not followed, may cause damage to equipment.
CALIFORNIA PROPOSITION 65
!DANGER Youcan
create dust when you cut, 
sand, drill or grind
materials such as wood, 
paint, metal, concrete, cement, or other masonry. This dust often contains chemicals known to cause cancer, birth defects, or other reproductive harm. Wear protective gear.
! WARNING This product or its power cord contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.
The following safety precautions must be followed at all times along with any other existing safety rules.
1. Read all manuals included |
|
|
|
with this product |
|
|
|
carefully. Be thoroughly |
| MANUAL |
|
familiar with the controls |
|
|
|
and the proper use of the |
|
|
|
|
|
| |
equipment. |
|
| |
2.Only persons well acquainted with these rules of safe operation should be allowed to use the tool.
! WARNING Safety
glasses and ear protection must be worn during operation.
3.Do not wear loose fitting clothing, scarves, or neck ties in work area.
Specifications
Tool |
|
Voltage | 120 V, 60 Hz |
Chuck Size | 1/2" |
Max Bit Size | 1/2" |
Blows per Minute | 42,000 |
RPM | 0 - 2800 |
Power Rating | 6 Amps |
REMINDER: Keep your dated proof of purchase for warranty purposes! Attach it to this manual or file it for safekeeping.
© 2006 Campbell Hausfeld/Scott Fetzer | For parts, product & service information | IN713300AV 3/06 |
20 | visit www.chpower.com |
|
|
|
