ATTACHING SHIELD (FOR LINE TRIMMER ATTACHMENT)
WARNING: The shield must be prop- erly installed. The shield provides partial protec- tion from the risk of thrown objects to the opera- tor and others and is equipped with a line limiter
Slot
Shield
Bracket
blade which cuts excess line to the proper length. The line limiter blade (on underside of shield) is sharp and can cut you. For proper orientation of shield, see KNOW YOUR TRIM- MER illustration in OPERATION section.
1.Remove wing nut from shield.
2.Insert bracket into slot as shown.
3.Pivot shield until bolt passes through hole in bracket.
4.Securely tighten wing nut onto bolt.
Line Limiter Blade
Wing
Nut
OPERATION
KNOW YOUR TRIMMER
READ THIS INSTRUCTION MANUAL AND SAFETY RULES BEFORE OPERATING YOUR UNIT. Compare the illustrations with your unit to familiarize yourself with the location of the various controls and adjustments. Save this manual for future reference.
Attachment hanger |
|
| Muffler | |
|
|
| Assist Handle | |
| Trimmer |
| Shaft |
|
| Attachment | Coupler |
| |
|
|
| ||
Trimmer |
|
|
| Throttle |
Head |
|
|
| Trigger |
| Shield | Depth |
| Spark |
|
|
| ||
|
| Adjustment |
| Plug |
|
| Knob |
| Primer |
|
|
|
| Bulb |
| Line Limiter |
|
|
|
| Blade |
|
|
|
| Blade |
|
|
|
Edger | Shield |
|
| Start |
Attachment |
| ON/STOP | ||
Gearbox | Lever | |||
|
| Switch |
| |
|
|
|
| |
Wheel |
|
| Starter handle | |
|
|
|
| |
|
| Edger |
|
|
|
| Blade |
|
|
ON/STOP SWITCH
The ON/STOP switch is located on the trigger handle and is used to stop the engine. To stop the engine, push and release the engine ON/ STOP switch.
PRIMER BULB
The PRIMER BULB removes air from the car- buretor and fuel lines and fills them with fuel. This allows you to start the engine with fewer pulls on the starter rope. Activate the primer bulb by pressing it and allowing it to return to its original form.
START LEVER
The START LEVER helps to supply fuel to the engine to aid in starting. Activate the starting system by moving the start lever to the START position. DO NOT squeeze the throttle trigger until the engine has started and runs. After the engine starts, allow the engine to
COUPLER
The COUPLER enables optional attach- ments to be installed on the unit.
10
