OPERATION

J

K

L

FIG. 7

SYSTEM CHARACTERISTICS

The cruise control should only be used while mowing or transporting on relatively smooth, straight surfaces. Other conditions such as trimming at slow speeds may cause the cruise control to disengage. Do not use the cruise control on slopes, rough terrian or while trimmimg or turning.

•With forward drive pedal depressed to desired speed, pull cruise control lever (J) up and hold while lifting your foot off the pedal, then release the lever.

To disengage the cruise control, depress the brake pedal or tap on forward drive pedal.

TO ADJUST MOWER CUTTING HEIGHT (See Fig. 8)

The position of the attachment lift lever (A) determines the cutting height.

A

FIG. 8

•Put attachment lift lever in desired cutting height slot.

The cutting height range is approximately 1" to 4". The heights are measured from the ground to the blade tip with the engine not running. These heights are approximate and may vary depending upon soil conditions, height of grass and types of grass being mowed.

•The average lawn should be cut to approximately 2-1/2 inches during the cool season and to over 3 inches during hot months. For healthier and better looking lawns, mow often and after moderate growth.

•For best cutting performance, grass over 6 inches in height should be mowed twice. Make the first cut relatively high; the second to desired height.

TO ADJUST GAUGE WHEELS (See Fig. 9)

Gauge wheels are properly adjusted when they are slightly off the ground when mower is at the desired cutting height in operating position. Gauge wheels then keep the deck in proper position to help prevent scalping in most terrain conditions.

NOTE: Adjust gauge wheels with tractor on a flat level surface.

•Adjust mower to desired cutting height (See “TO AD- JUST MOWER CUTTING HEIGHT” in this section of manual).

•With mower in desired height of cut position, gauge wheels should be assembled so they are slightly off the ground. Install gauge wheel in appropriate hole. Tighten securely.

•Repeat for all, installing gauge wheel in same adjust- ment hole.

FIG.9

TO OPERATE MOWER

Your tractor is equipped with an operator presence sensing switch. Any attempt by the operator to leave the seat with the engine running and the attachment clutch engaged will shut off the engine. You must remain fully and centrally positioned in the seat to prevent the engine from hesitating or cutting off when operating your equipment on rough, rolling terrain or hills.

•Select desired height of cut with attachment lift lever.

•Start mower blades by engaging attachment clutch control.

TO STOP MOWER BLADES - disengage attachment clutch control.

CAUTION: Do not operate the mower without either the entire grass catcher, on mowers so equipped, or the deflector shield (S) in place.

S

FIG. 10

10

Page 9 Page 11
Page 10
Image 10
Poulan PB22H46YTX, 96042006900 To Adjust Mower Cutting Height See Fig, To Adjust Gauge Wheels See Fig, To Operate Mower
Page 9 Page 11

418774, PB22H46YTX, 96042006900 specifications

The Poulan 418774, also known by its model number 96042006900, is a robust and versatile lawn tractor that caters to homeowners and lawn care enthusiasts alike. Designed for residential use, the PB22H46YTX offers a host of features that enhance its performance, comfort, and efficiency, making it an excellent option for maintaining medium to large-sized lawns.

One of the standout characteristics of the Poulan PB22H46YTX is its powerful 22-horsepower Briggs & Stratton engine. This reliable engine provides ample power to tackle various terrain types and allows for effective mowing, even in challenging conditions. One of the engine's key features is its overhead valve design, which promotes better fuel efficiency and reduces emissions, aligning with modern environmental standards.

The PB22H46YTX comes equipped with a 46-inch cutting deck, which is ideal for larger mowing areas. This wide cutting swath allows users to cover more ground in less time, significantly reducing the time spent on yard maintenance. The cutting deck also features an adjustable height range, giving users the flexibility to choose the optimal grass length for their specific lawn care needs.

Another significant feature of the Poulan PB22H46YTX is its hydrostatic transmission. This technology allows for seamless speed adjustments, offering a smoother driving experience without the need for gear shifting. Users can easily maneuver the tractor across the yard, making it easier to navigate around trees, flower beds, and other obstacles.

In terms of comfort, the PB22H46YTX includes a spacious operator's seat with ergonomic design, ensuring optimal support during extended periods of use. The dashboard is user-friendly, providing easy access to essential controls and information, including engine status and speed.

Durability is another hallmark of the Poulan brand, and the PB22H46YTX is built to last. It features a reinforced steel frame and heavy-duty tires, providing stability and traction on various surfaces. Additionally, the cutting blades are designed for longevity and can handle tough grass conditions with ease.

Overall, the Poulan 418774, 96042006900, and PB22H46YTX model offers an ideal blend of power, comfort, and advanced features, making it a top choice for anyone looking to maintain their lawn effortlessly and efficiently.
Top Page Image Contents