SReduced--Kickback Guide Bar, designed with a small radius tip which reduces the size of the kickback danger zone on the bar tip. A Reduced--Kickback Guide Bar has been demonstrated to significantly re- duce the number and seriousness of kick- backs when tested in accordance with safety requirements for gasoline powered

chain saws as set by ANSI B175.1.

Reduced Kickback Symmetrical Guide Bar

Small Radius Tip

Symmetrical Guide Bar

Large Radius Tip

S Low--Kickback Chain, designed with a contoured depth gauge and guard link which deflect kickback force and allow wood to gradually ride into the cutter. Low-- Kickback Chain has met kickback per- formance requirements when tested on a representative sample of chain saws be- low 3.8 cubic inch displacement specified in ANSI B175.1.

Contoured Depth Gauge

 

Elongated Guard Link

 

Deflects

Low--- Kickback

kickback force

and allows wood

Chain

to gradually ride

 

into cutter

 

Can Obstruct Material

Not a Low--- Kickback Chain

SFront Hand Guard, designed to reduce the

chance of your left hand contacting the chain if your hand slips off the front handlebar.

SPosition of front and rear handlebars, de- signed with distance between handles and “in-line” with each other. The spread and “in-line” position of the hands provided by this design work together to give balance and resistance in controlling the pivot of the saw back toward the operator if kick- back occurs.

CHAIN BRAKE AND CKA ANGLE

SChain Brake, designed to stop the chain in the event of kickback.

WARNING: WE DO NOT REP- RESENT AND YOU SHOULD NOT AS- SUME THAT THE CHAIN BRAKE WILL

PROTECT YOU IN THE EVENT OF A KICK- BACK. Kickback is a lightning fast action which throws the bar and rotating chain back and up toward the operator. Kickback can be caused by allowing contact of the bar tip in the danger zone with any hard object. Kickback can also be caused by pinching the saw chain along the top of the guide bar. This action may push the guide bar rapidly back toward the op- erator. Either of these events may cause you to lose control of the saw which could result in serious injury or even death. DO NOT RELY UPON ANY OF THE DEVICES BUILT INTO YOUR SAW. YOU SHOULD USE THE SAW PROPERLY AND CAREFULLY TO AVOID KICKBACK. Reduced--kickback guide bars and low--kickback saw chains reduce the chance and magnitude of kickback and are recommended. Your saw has a low kickback chain and bar as original equipment. Repairs on a chain brake should be made by an autho- rized servicing dealer. Take your unit to the place of purchase if purchased from a servic- ing dealer, or to the nearest authorized master service dealer.

STip contact in some cases may cause a light- ning fast reverse REACTION, kicking guide bar up and back toward operator.

SPinching the saw chain along the top of the guide bar may push the guide bar rapidly back toward the operator.

SEither of these reactions may cause you to lose control of the saw which could result in serious injury. Do not rely exclusively upon devices built into your saw.

WARNING: Computed kickback angle (CKA) listed on your saw and listed in the CKA table below represents angle of kickback your bar and chain combinations will have when tested in accordance with CSA (Cana- dian Standards Association) and ANSI stan- dards. When purchasing replacement bar and chain, considerations should be given to the lower CKA values. Lower CKA values repre- sent safer angles to the user, higher values in- dicate more angle and higher kick energies. Computed angles represented indicate total energy and angle associated without activation of the chain brake during kickback. Activated angle represents chain stopping time relative to activation angle of chain break and resulting kick angle of saw. In all cases lower CKA val- ues represent a safer operating environment for the user.

The following guide bar and chain combina- tions meet kickback requirements of CSA Standards Z62.1, Z62.3, & ANSI B175.1 when used on saws listed in this manual. Use of bar and chain combinations other than those listed is not recommended and may not meet the CKA requirements per standard.

Computed kickback angle (CKA) Table

 

BAR

 

CHAIN P/N

 

MODEL

P/N

 

Length

CKA without chain brake

PP4218AV

952044689

 

18″

952051338

33_

5

Page 4 Page 6
Page 5
Image 5
Poulan 966513901 Chain Brake and CKA Angle, Chain saws as set by Ansi B175.1, Front Hand Guard, designed to reduce
Page 4 Page 6

966513901 specifications

The Poulan 966513901 is a powerful and versatile chainsaw designed for both professional landscapers and enthusiastic DIYers. Renowned for its durability and efficiency, this model is engineered to tackle a variety of cutting tasks, from felling trees to trimming branches and cutting firewood.

One of the standout features of the Poulan 966513901 is its robust engine. Powered by a high-performance gas engine, this chainsaw delivers impressive horsepower, enabling it to cut through tough materials with ease. The engine is also designed to provide efficient fuel consumption, which translates to longer operating times and reduced refueling intervals, making it ideal for extensive jobs.

The chainsaw features a 18-inch guide bar, optimizing cutting length while maintaining a manageable weight. This balance enhances maneuverability, allowing users to handle the chainsaw comfortably for extended periods. Additionally, the chainsaw comes equipped with a chain brake, a crucial safety feature that helps protect the user in the event of kickback. This brake engages automatically when the chainsaw is dropped or tilted unexpectedly, providing an additional layer of protection during operation.

Another noteworthy characteristic of the Poulan 966513901 is its Easy Start technology. This innovation simplifies the starting process, allowing users to start the engine with minimal effort. This feature is particularly beneficial for those who may struggle with traditional pull-start mechanisms, making it accessible for users of varying experience levels.

The chainsaw also includes an adjustable automatic oiler, ensuring that the chain remains adequately lubricated during operation. This not only extends the lifespan of the chain but also enhances cutting efficiency. The oil reservoir is easy to access, enabling quick refills without interrupting work flow.

In terms of weight, the Poulan 966513901 strikes a balance between power and portability. It is lightweight enough for easy handling, yet robust enough to handle demanding tasks. This makes it a suitable choice for both professional and home use.

Overall, the Poulan 966513901 stands out in the crowded market of chainsaws due to its powerful performance, user-friendly features, and robust design. Whether you are cutting firewood, maintaining your property, or undertaking more significant landscaping projects, this chainsaw is a reliable companion that delivers efficiency and ease of use.
Top Page Image Contents