SERVICE AND ADJUSTMENTS

TRANSAXLE GEAR SHIFT LEVER NEUTRAL- ADJUSTMENT (See Fig. 23)

The transaxle should be in neutral when the gear shift lever is in neutral (N) (lock gate) position. The adjustment is preset at the factory; however, if adjustment is needed, proceed as follows:

•Make sure transaxle is in neutral (N).

NOTE: When the tractor rear wheels move freely, the transaxle is in neutral.

•Loosen adjustment bolt in front of the right rear wheel.

•Position the gear shift lever in the neutral (N) posi- tion.

•Tighten adjustment bolt securely.

NOTE: If additional clearance is needed to get to adjustment bolt, move mower deck height to the lowest position.

NOTE: To seal tire punctures and prevent flat tires due to slow leaks, tire sealant may be purchased from your local parts dealer. Tire sealant also prevents tire dry rot and corrosion.

WASHERS

RETAINING

RING

AXLE COVER

SQUARE KEY (REAR

WHEEL ONLY)

FIG. 24

TO START ENGINE WITH A WEAK BATTERY (See Fig. 25)

GEARSHIFT LEVER

NEUTRAL LOCK GATE

WARNING: Lead-acid batteries gen- erate explosive gases. Keep sparks, flame and smoking materials away from batteries. Always wear eye protection when around batteries.

ADJUSTMENT

BOLT

FIG. 23

TO ADJUST STEERING WHEEL ALIGN- MENT

If steering wheel crossbars are not horizontal (left to right) when wheels are positioned straight forward, remove steer- ing wheel and reassemble per instructions in the Assembly section of this manual.

FRONT WHEEL TOE-IN/CAMBER

The front wheel toe-in and camber are not adjustable on your tractor. If damage has occurred to affect the front wheel toe-in or camber, contact your nearest authorized service center/department.

TO REMOVE WHEEL FOR REPAIRS (See Fig. 24)

If your battery is too weak to start the engine, it should be recharged. (See "BATTERY" in the MAINTENANCE sec- tion of this manual).

If “jumper cables” are used for emergency starting, follow this procedure:

IMPORTANT: YOUR TRACTOR IS EQUIPPED WITH A 12 VOLT SYSTEM. THE OTHER VEHICLE MUST ALSO BE A 12 VOLT SYSTEM. DO NOT USE YOUR TRACTOR BATTERY TO START OTHER VEHICLES.

TO ATTACH JUMPER CABLES -

•Connect one end of the RED cable to the POSITIVE

(+)terminal of each battery(A-B), taking care not to short against tractor chassis.

•Connect one end of the BLACK cable to the NEGATIVE (-) terminal (C) of fully charged battery.

•Connect the other end of the BLACK cable (D) to good chassis ground, away from fuel tank and battery.

TO REMOVE CABLES, REVERSE ORDER -

•BLACK cable first from chassis and then from the fully charged battery.

•RED cable last from both batteries.

•Block up axle securely.

•Remove axle cover, retaining ring and washers to allow wheel removal (rear wheel contains a square key - Do not lose).

•Repair tire and reassemble.

•On rear wheels only: align grooves in rear wheel hub and axle. Insert square key.

•Replace washers and snap retaining ring securely in axle groove.

•Replace axle cover.

WEAK OR DEAD BATTERY

FULLY CHARGED

BATTERY

FIG. 25

22

Page 21 Page 23
Page 22
Image 22
Poulan PBA19542LT Transaxle Gear Shift Lever NEUTRAL- Adjustment See Fig, To Start Engine with a Weak Battery See Fig
Page 21 Page 23

PBA19542LT specifications

The Poulan PBA19542LT is a versatile and powerful tool designed to meet the demands of both homeowners and professionals for yard care and maintenance. This battery-powered lawn care equipment combines convenience with performance, making it a go-to option for tackling various outdoor tasks with ease.

One of the standout features of the PBA19542LT is its 42V lithium-ion battery that provides an impressive runtime. This technology ensures that users have enough power to complete their tasks without the hassle of cords or the need for frequent recharging. The battery is designed to efficiently manage energy use, offering consistent performance until it requires a recharge, allowing for longer periods of use on a single charge.

This model is equipped with a robust brushless motor, which enhances its overall performance. The brushless motor operates more efficiently than traditional motors, reducing wear and tear, allowing for a longer lifespan. It provides a quiet operation, making it suitable for residential areas and times when noise should be minimized.

The Poulan PBA19542LT also features an adjustable cutting height system. This allows users to customize the height of the cut according to their preferences or the specific requirements of their lawn. With a simple adjustment, it can handle different types of grass and terrain, providing a tailored mowing experience.

Another notable characteristic of this lawn care tool is its lightweight design. Weighing significantly less than many gas-powered counterparts, the PBA19542LT allows for ease of maneuverability, reducing fatigue during extended use. Ergonomically designed handles provide comfort and control, ensuring a pleasant user experience while navigating around flower beds or other landscape features.

Additionally, the PBA19542LT incorporates user-friendly features, such as quick-release battery access, making swapping batteries or charging them more convenient. The compact design also allows for easy storage when not in use.

In summary, the Poulan PBA19542LT is an innovative, battery-powered lawn maintenance tool that offers a blend of power, efficiency, and user convenience. With its brushless motor, adjustable cutting heights, lightweight construction, and reliable battery technology, it stands out in the market for those seeking efficient and effective lawn care. Ideal for residential use, it meets the evolving needs of homeowners looking to maintain their outdoor spaces with minimal hassle.
Top Page Image Contents