SERVICE AND ADJUSTMENTS

WARNING: TO AVOID SERIOUS INJURY, BEFORE PERFORMING ANY SERVICE OR ADJUST- MENTS:

Depress clutch/brake pedal fully and set parking brake.

Place gearshift lever in neutral (N) position.

Place attachment clutch in “DISENGAGED” position.

Turn ignition key to “STOP” and remove key.

Make sure the blades and all moving parts have completely stopped.

Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.

TRACTOR

TO REMOVE MOWER (See Fig. 15)

Mower will be easier to remove from the right side of tractor.

Place attachment clutch in “DISENGAGED” position.

Move attachment lift lever forward to lower mower to its lowest position.

Roll belt off engine pulley.

Remove small retainer spring, and remove clutch spring off pulley bolt.

Remove large retainer spring, slide collar off and push housing guide out of bracket.

Disconnect anti-swaybar from chassis bracket by re- moving retainer spring.

Disconnect suspension arms from rear deck brackets by removing retainer springs.

Disconnect front links from deck by removing retainer springs.

Raise lift lever to raise suspension arms. Slide mower out from under tractor.

IMPORTANT: IF AN ATTACHMENT OTHER THAN THE MOWER DECK IS TO BE MOUNTED ON THE TRACTOR, REMOVE THE FRONT LINKS AND HOOK THE CLUTCH SPRING INTO SQUARE HOLE IN FRAME.

TO INSTALL MOWER (See Fig. 15)

Raise attachment lift lever to its highest position.

Slide mower under tractor with deflector shield to right side of tractor.

Lower lift lever to its lowest position.

Connect front links to mower deck and secure with retainer springs..

Connect suspension arms to rear deck brackets and secure with retainer springs.

Connect anti-swaybar to chassis bracket and secure with retainer spring.

Push clutch cable housing guide into bracket, slide col- lar onto guide and secure with large retainer spring.

Place flat washer and clutch spring on idler pulley bolt and secure with small retainer spring.

Install belt onto engine pulley.

TO LEVEL MOWER HOUSING

Adjust the mower while tractor is parked on level ground or driveway. Make sure tires are properly inflated (See “PRODUCT SPECIFICATIONS” section of this manual). If tires are over or underinflated, you will not properly adjust your mower.

 

SMALL RETAINER SPRING

 

 

 

 

CLUTCH SPRING

 

 

 

 

FLAT WASHER

 

 

SQUARE HOLE

SMALL RETAINER SPRING

 

SUSPENSION

ENGINE PULLEY

 

 

 

ARMS

 

 

 

 

CLUTCH SPRING

 

 

 

 

 

 

 

FRONT LINK

RETAINER SPRING

 

 

 

 

ANTI-SWAY BAR

 

 

 

 

 

 

 

 

RETAINER SPRINGS

COLLAR

 

 

 

(BOTH SIDES)

HOUSING GUIDE

LARGE RETAINER

 

 

 

SPRING

BRACKET

 

DEFLECTOR SHIELD

 

 

 

 

 

 

 

FIG. 15

19

Page 19
Image 19
Poulan PBA19542LT manual Service and Adjustments, To Remove Mower See Fig, To Install Mower See Fig, To Level Mower Housing

PBA19542LT specifications

The Poulan PBA19542LT is a versatile and powerful tool designed to meet the demands of both homeowners and professionals for yard care and maintenance. This battery-powered lawn care equipment combines convenience with performance, making it a go-to option for tackling various outdoor tasks with ease.

One of the standout features of the PBA19542LT is its 42V lithium-ion battery that provides an impressive runtime. This technology ensures that users have enough power to complete their tasks without the hassle of cords or the need for frequent recharging. The battery is designed to efficiently manage energy use, offering consistent performance until it requires a recharge, allowing for longer periods of use on a single charge.

This model is equipped with a robust brushless motor, which enhances its overall performance. The brushless motor operates more efficiently than traditional motors, reducing wear and tear, allowing for a longer lifespan. It provides a quiet operation, making it suitable for residential areas and times when noise should be minimized.

The Poulan PBA19542LT also features an adjustable cutting height system. This allows users to customize the height of the cut according to their preferences or the specific requirements of their lawn. With a simple adjustment, it can handle different types of grass and terrain, providing a tailored mowing experience.

Another notable characteristic of this lawn care tool is its lightweight design. Weighing significantly less than many gas-powered counterparts, the PBA19542LT allows for ease of maneuverability, reducing fatigue during extended use. Ergonomically designed handles provide comfort and control, ensuring a pleasant user experience while navigating around flower beds or other landscape features.

Additionally, the PBA19542LT incorporates user-friendly features, such as quick-release battery access, making swapping batteries or charging them more convenient. The compact design also allows for easy storage when not in use.

In summary, the Poulan PBA19542LT is an innovative, battery-powered lawn maintenance tool that offers a blend of power, efficiency, and user convenience. With its brushless motor, adjustable cutting heights, lightweight construction, and reliable battery technology, it stands out in the market for those seeking efficient and effective lawn care. Ideal for residential use, it meets the evolving needs of homeowners looking to maintain their outdoor spaces with minimal hassle.