Samsung SC- MS10, SC- MS11, SC- MS15 How to Use the Battery Pack, To insert the Battery Pack

ENGLISH

How to Use the Battery Pack

Battery Pack Installation / Ejection	/
It is recommended to purchase one or more additional Battery Packs	Miniket
to allow continuous use of your Miniket Photo.	Photo0

To insert the Battery Pack

1.Push the [OPEN] switch on the bottom side of the set in the direction of ! as shown in the diagram and open the lid.@

2.Insert the Battery Pack into the battery slot until it softly clicks. Make sure that the SAMSUNG logo is facing up while the set is placed as shown in the diagram.

To eject the Battery Pack

1.Push the [Battery Lock Switch] in the direction as shown in the diagram to pop the Battery Pack out.

2.Pull the ejected Battery Pack out in the direction as shown in the diagram.

<Inserting the Battery Pack>
			1.		[OPEN]
					!
		➮		@0
!	@		2.
Cover				0
				SAMSUNG	0
<Ejecting the Battery Pack>
		➮	1.	[Battery Lock Switch]
					0
Battery Lock
			2.
Switch

0

[ Notes ]

✤Clean the terminals to remove any foreign substances before inserting the Battery Pack.

✤If the Miniket Photo will not be in use for a while, remove the Battery Pack from the Miniket Photo.

✤It is recommended to prepare fully charged additional Battery Packs for outdoor use.

✤Additional Battery Packs are available at your local Samsung dealer and service center.

[ Warning ]

✤When you eject the Battery Pack from the Miniket Photo, hold the

20Battery Pack so as not to drop it.

[	]
✤		0
✤	Miniket Photo	Miniket Photo
	0
✤		0
✤		0

[	]
✤	Miniket Photo	0