Samsung MS11, MS15 manual Setting the White Balance, Center. Press the joystick OK to set, or press

ENGLISH Photo Mode :	Photo
Setting the Capturing Options

Setting the White Balance

The White Balance allows calibration of the picture for		3	23
accurate color display in different lighting conditions.			2592
It is recommended to set the white balance prior to any recording.
1.	Turn the Mode Dial to Photo mode.
2.	Press the [POWER] button to turn on the Miniket Photo.

3.Press the [MENU] button.

◆ Menu screen appears.

4.Move the joystick left / right to select <White Balance>.

5.Select an option by moving the joystick up / down, and

then press the joystick (OK).		4
◆ To set the Custom WB, frame the white subject on			Photo
the center. Press the joystick (OK) to set, or press the			ISO
[MENU] button to cancel and exit to Menu screen. Photos			White Balance
captured after the Custom WB set will be affected by the			Auto	A
setting.			Daylight
Auto	Automatically sets according to the shooting		Cloudy
			Fluorescent H
	environment.
Daylight	Adjusts the color according to daylight/indoor,		Move	OK Select
	outdoor light
Cloudy	You can select this when you cannot have	5
	daylight as a direct light, such as when it is		Photo
	partly-cloudy or cloudy.		ISO
	Suitable in a halogen or 3-wavelength light
Fluorescent H			White Balance
	environment.
Fluorescent L	Suitable for a fluorescent light environment.		Auto	A
Tungsten	Suitable for an incandescent light		Daylight
	environment.		Cloudy
Custom WB	You can adjust the white balance as you wish		Fluorescent H
	based on the shooting environment.		Move	OK Select
6. Press the [MENU] button to exit the menu.		6
◆ An icon indicating the selected white balance appears				23
on the screen.			2592

◆ If <Auto> is selected, no icon will be displayed.

[ Notes ]

✤ In general outdoors picture taking, <Auto> setting will allow users to have best results.

✤As the lighting condition changes, set the appropriate white balance before taking a picture.

✤The subject used for <Custom WB> should be white. If not, the color balance will not be natural.

✤Regarding White Balance setting in Scene modes, refer to page 72.

✤ While the menu screen is displayed, pressing the [Record / Stop] button will	✤
exit the menu.	✤

IN			0
			0
1.		Photo	0
2.	[POWER]		Miniket Photo0
3.	[MENU]	0
	◆	0

4.<White Balance>0

5.(OK)

0

◆Custom WB

	0	(OK)
	[MENU]		0
	Custom WB
	0
	Auto	0
MENU Exit
	/	/	0
	Daylight
	Cloudy	0
Fluorescent H		3	0
Fluorescent L		0
	Tungsten	0
MENU Exit
Custom WB
IN	0
6.	[MENU]	0
◆			0
◆	<Auto>		0
[	]
✤	<Auto>
	0
✤			0
✤	<Custom WB>		0
	0
Scene	White Balance		72 0
	[Record/Stop]	0	69