Samsung MS11, MS15 manual Setting the Miniket Photo Setting the System, Setting the NTSC/PAL

ENGLISH	Setting the Miniket Photo :
Setting the System		Miniket Photo
Setting the NTSC/PAL		NTSC / PAL

You can set the Miniket Photo's output properly when playback on a TV .

1.	Turn the Mode Dial to the Settings mode.	1.
2.	Press the [POWER] button to turn on the Miniket Photo.	2.

	Miniket Photo	0
Settings	0
[POWER]	Miniket Photo0

3. Select <NTSC/PAL> by moving the joystick	3
left / right.

4.Select the desired option by moving the joystick up / down and then press the joystick (OK).

◆<NTSC>: Sets to NTSC standard.

◆<PAL>: Sets to PAL standard. Refer to page 146

Settings

NTSC/PAL

Move Select

3.		<NTSC/PAL>0
4.
(OK)	0
◆ <NTSC>		NTSC	0
◆ <PAL>	146	PAL	0
		0

4	Settings
5. After you finish setting, turn the Mode Dial to
the desired mode.	NTSC/PAL
[ Warning ]
✤ Recording and playback settings should be identical.
NTSC recordings are properly played back in NTSC	Move	Select
mode.

✤If recording and playback settings are different, displayed video

may not be perfect. ✤

✤When using a TV, be sure to set the same output setting. Playback on a TV is not available if the video format is different than that of Miniket Photo. For example, Miniket Photo is set to PAL and the TV video format is NTSC, then video playback on the TV is not available.

5.		0
[	]
✤	NTSC	0 NTSC
		0
✤
	0
		0
Miniket Photo		0
Miniket Photo	PAL	NTSC
	0

45