Samsung SC- MS10, SC- MS11, SC- MS15 Setting the ISO Speed Sensitivity, Minikets imaging sensor

ENGLISH Photo Mode :
Setting the Capturing Options	Photo

Setting the ISO Speed (Sensitivity) ISO

ISO Speed is the rating of a film's sensitivity to light.	3	23
Though Miniket Photo doesn't use film, they normally
		2592
use the same rating system to describe the sensitivity of
the Miniket's imaging sensor.

1.Turn the Mode Dial to Photo mode.

2.Press the [POWER] button to turn on the Miniket Photo.

3.Press the [MENU] button.

IN

ISO			0
			0
1.		Photo	0
2.	[POWER]		Miniket Photo0
3.	[MENU]	0

◆0

◆ Menu screen appears.			4	Photo
4. Move the joystick left / right to select <ISO>.				ISO
5. Select an option by moving the joystick up /
				ISO
down, and then press the joystick (OK).				Auto
	Auto	Automatically sets the ISO according to the light		100
				200
		brightness		400
	100	The standard sensitivity rate, and therefore it is the		Move
		usual shooting sensitivity rate.
	200	When you use this in a dark place, you can increase	5	Photo
		the shutter speed, but it might come out grainy.
		When you use this in a very dark place, you can		ISO
				ISO
	400	greatly increase the shutter speed, but you may get
		a rough image due to severe graininess.		Auto
				100
6. Press the [MENU] button to exit the menu.
				200
◆ An icon indicating the selected ISO Speed				400
	appears on the screen.			Move

◆If <Auto> is selected, no icon will be displayed. 6

[ Notes ]		2592
✤ The higher the ISO Speed number, the higher
	sensitivity to light. It results in brighter imaging under
	darker lighting.
✤	High ISO Speed setting may result in picture noise.	100
		ISO

✤Regarding ISO setting in Scene modes, refer to page 72.

✤If <Anti-Shake> is set, ISO setting will be limited.

✤While the menu screen is displayed, pressing the [Record / Stop]

68button will exit the menu.

ISO

AUTO

ISO

100

ISO

200

ISO

400

OK Select

ISO

AUTO

ISO

100

ISO

200

ISO

400

OK Select

23

MENU Exit

MENU Exit

IN

4.					<ISO>0
5.	(OK)
				0
	Auto				ISO
	100		0
	200				0
	400		0
6.		[MENU]			0
	◆			<Auto>	ISO	0
	◆					0
[		]
✤ ISO						0
						0
✤			ISO		0
✤			72	Scene	ISO
				0
✤			<Anti-Shake>		ISO

0

✤[Record/Stop]

0