Installing the front panel I/O cable assembly

To install he front panel I/O cable assembly:

1.With power removed and the chassis open, guide the front panel I/O cable assembly cables through the chassis openings from which they were removed.

2.Place the front panel I/O cable assembly in the chassis and slide it up into position as shown in the following figure . Install the screw 2.

Figure 5-18Installing the front panel I/O cable assembly

3.Connect the front panel I/O cable assembly cables to the system board as shown in the following figure.

Figure 5-19Connecting the front panel I/O cable assembly cables

Table 5-5Connecting the front panel I/O cable assembly cables

Item Description

1Front audio

2Front 1394a

3Front USB

88 Chapter 5 Replacing components

ENWW

Page 100
Image 100
HP Z800 Sp632up SP632UPABA, FL939UT FL939UT#ABA manual Installing the front panel I/O cable assembly