HP FL939UT FL939UT#ABA, Z800 Sp632up SP632UPABA manual Creating HP Backup and Recovery Hpbr media

Creating HP Backup and Recovery (HPBR) media

NOTE: HPBR functionality is used with Windows XP only. For details, refer to the SoftThinks guide on the Documentation and Diagnostics CD included with the workstation.

The Initial Recovery Point can be burned to optical media and used to recover a system. This section describes making the media.

NOTE: The workstation must have a CD or DVD writer to create the media set.

To create HPBR recovery media:

1.The Initial Recovery Point was captured when the RestorePlus! media set was created previously.

If the IRP was not created, start the HP Backup and Recovery Manager and create recovery points using the Expert mode. Follow the HPBR online documentation for instructions.

2.Burn the IRP to media from HPBR.

Select HPBR Start > All Programs > HP Backup & Recovery > HP Backup and Recovery Manager.

3.Select Next at the first screen.

Select Create recovery CDs or DVDs to recover the system, and then select Next.

4.Choose Next to display a list of available CD image and the recovery points.

5.Check the box next to Initial Recovery Point, and then select Next.

6.Follow the instructions to create the media.

ENWW Restoring Windows XP Professional 27