HP FL939UT FL939UT#ABA, Z800 Sp632up SP632UPABA manual Enww

5.Insert the slot load assembly into the chassis optical cage until it reaches the release latch. Pull the latch and slide the slot load assembly into the chassis, past the latch.

Release the latch and then slide the assembly further into the chassis until it snaps into place 2 as shown in the following figure.

NOTE: Install the slot load optical bay with the slot load drive at the top. Figure 5-36Installing the slot load assembly

6.Connect the chassis power cable to the optical disk drive power cable as shown in the following figure.

Figure 5-37Connecting chassis power cable to optical disk drive power cable

ENWW Removing and installing components 103