HP FL939UT FL939UT#ABA, Z800 Sp632up SP632UPABA manual Installing the side access panel sensor

4.Disconnect the sensor cable from the inline chassis cable as shown in the following figure . Figure 5-13Removing the side access panel sensor

5.Slide the sensor back in its slot, push the sensor down, and then remove it from the chassis 2.

Installing the side access panel sensor

To replace the side access panel sensor, reverse the removal steps.

NOTE: The cable must be looped and stored in the cable clip provided to ensure it is not in the power supply sliding zone.

ENWW Removing and installing components 83