HP Z800 Sp632up SP632UPABA, FL939UT FL939UT#ABA manual Enww

7.While keeping the hard drive carrier handle in its fully open position, slide the hard drive into the bay until it comes to a hard stop. When the drive is installed, rotate the handle up until it snaps into place, fully securing the drive 2.

NOTE: The hard drive carrier handle is used as a lever to properly seat the connectors and to securely retain the hard drive. If the handle is closed prematurely, the proper connection is not made and the hard drive is not retained properly.

Figure 5-44Installing the drive in the chassis

NOTE: Ensure that the data cable for the selected bay is connected to the proper data port connector (see Hard disk drive cable configuration on page 107).

8.Reinstall all removed components and reconnect any cables that have been disconnected.

110 Chapter 5 Replacing components ENWW