HP FL939UT FL939UT#ABA, Z800 Sp632up SP632UPABA manual 50Removing the drive screws

10.Remove the optical bay slot carrier from the chassis.

Lift and hold the drive release latch at the green touch point , and then slide the slot load assembly out of the chassis 2 as shown in the following figure.

TIP: Push on the slot load assembly from the inside of the chassis.

Figure 5-49Removing the slot load assembly

11.Remove the four Torx slotted screws that secure the drive in the slot load bay as shown in the following figure.

Figure 5-50Removing the drive screws

ENWW Removing and installing components 113