HP FL939UT FL939UT#ABA, Z800 Sp632up SP632UPABA manual Hard disk drive, Topic

Hard disk drive

This workstation accommodates both SAS and SATA hard drives.

Both 3.5 in. standard hard disk drives or 2.5 in. small form factor (SFF) hard disk drives may be installed in the workstation.

NOTE: A 2.5 in. hard drive must be mounted in a 3.5 in. adapter before it can be installed in the chassis blind-mate carrier.

Hard disk drives can be installed in the hard drive bay and the optical drive bay. Drives should be installed in the hard drive bay first, then in the optical drive bay. Installation in the optical drive bay requires an optional adapter kit.

The hard drives blind-mate (direct-connect) to chassis mounted connectors, so manual cable connections may be avoided.

This section includes these topics:

Topic

Removing a hard disk drive from the hard drive bay on page 106

Installing a hard disk drive in the hard drive bay on page 107

Removing a hard disk drive from the slot load optical bay on page 111

Installing a hard disk drive in the slot load optical bay on page 115

Removing a hard disk drive from the optical drive bay on page 119

Installing a hard disk drive in the optical drive bay on page 121

Installing dual SFF hard drives in the optical drive bay on page 123

ENWW Removing and installing components 105