HP FL939UT FL939UT#ABA, Z800 Sp632up SP632UPABA manual Enww

6.Align the DIMM connector key with the DIMM socket key, and then seat the DIMM firmly in the socket as shown in the following figure.

CAUTION: DIMMs and their sockets are keyed for proper installation. To prevent socket or DIMM damage, align these guides properly when installing DIMMs.

Figure 5-92Seating the DIMM

7.Secure the socket levers 2.

8.Reinstall all removed components and reconnect any cables that have been disconnected.

NOTE: If you receive a DIMM-related error message after you re-start the workstation, refer to BIOS errors and warnings on page 139 for error message information.

ENWW Removing and installing components 143