HP Z800 Sp632up SP632UPABA manual Chassis security, Clearing passwords, Side access panel key lock

Clearing passwords

If you forget the password, you cannot access the workstation.

For instructions about clearing passwords, see Configuring password security and resetting CMOS on page 211.

Chassis security

Side access panel key lock

The side access panel contains a key lock to prevent the panel from being removed.

The key is fastened to the workstation rear panel when shipped from the factory.

Side access panel sensor (Smart Cover Sensor) (optional)

The optional Side access panel sensor is a combination of hardware and software technology that can alert you when the workstation side access panel has been removed (if the sensor has been configured in the Computer Setup (F10) Utility).

The three levels of Side access panel sensor protection are shown in the following table:

Table 4-4Side access panel sensor protection levels

Level	Setting	Description
Level 0	Disabled	Side access panel sensor * is disabled (default).
Level 1	Notify User	When the workstation restarts, a message appears indicating that the
		workstation side access panel has been removed.
Level 2	Setup Password	When the workstation is restarted, a message appears indicating that the
		workstation side access panel has been removed. You must enter the setup
		password to continue.

*Side access panel sensor settings can be changed using the Computer Setup (F10) Utility.

58 Chapter 4 System management ENWW