HP FL939UT FL939UT#ABA Installing the rear system fan assembly, 76Removing the rear system fans

6.Use a Torx T-15 driver to remove the four rear system fan assembly Torx screws , and then remove the assembly from the rear of the chassis.

Figure 5-76Removing the rear system fans

Installing the rear system fan assembly

1.With the power off and the chassis open for access, place the rear system fan assembly in the chassis. Use a Torx T15 driver to secure the rear fan assembly in the chassis with four screws as shown in the following figure.

Figure 5-77Installing the rear system fan assembly

ENWW Removing and installing components 131